Cam Identity (Markings not seen before)

[spooln4fun]

I would like some help identifying these cams. I'm a bit thrown off due to the "L" stamped on them. I see no known aftermarket markings, was told they were BC272s, but there are no stamps on the small ring saying BC0101 or BC101 only numbers on it are on the end opposite of the cam gears. More pics can be had for anyone.

<img src="http://farm8.staticflickr.com/7078/7311780354_29e623f183.jpg" width="800" height="675" alt="IMG_1318"></a>
<img src="http://farm9.staticflickr.com/8005/7311782854_65e12f43d8.jpg" width="800" height="675" alt="IMG_1316"></a>
<img src="http://farm8.staticflickr.com/7237/7311784300_17d7dcd7d6_c.jpg" width="800" height="675" alt="IMG_1315"></a>
<img src="http://farm8.staticflickr.com/7236/7311787286_83bb54968d.jpg" width="675" height="800" alt="IMG_1313"></a>
<img src="http://farm8.staticflickr.com/7076/7311788700_98cc61090c.jpg" width="675" height="800" alt="IMG_1312"></a>
<img src="http://farm8.staticflickr.com/7072/7311789822_d945f799ab.jpg" width="675" height="800" alt="IMG_1311"></a>

 

[dsmGSTtuner]

i hate to say it man but i think those are stock. BC are usually marked or if they are regrind cams, they have the duration etched into the end of the shaft where the cam gear bolts on. Ive noticed alot of people go through this same thing. Heck, beat the guy down with the two cams you bought from him ....na just kidding man. Hey actually do they have little green paint spots on them? If they do, i acually have a set of regrinds tat have little green dots on them as well. I think that might be the markings instead of etched in numbers.

 

[19BLACKGST98]

I think they are stock also. I spent a lot of time trying to id a set of cams given to me also and I think they are stock and mine have 185 etched in the cam gear side.

 

[BogusSVO]

Any new info on these "L" cams?