The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Buying a 98 GST whats wrong with this pic missing bov?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Status
Not open for further replies.

Ace4g63

Probationary Member
12
0
Jan 25, 2013
lake county, Illinois
So tomorrow i will be going to buy (maybe) a 98 GST will be my first dsm!!!
I asked the guy to send me pics of the engine bay and look alright i noticed right away that the battery wasn't there and i asked if it had been relocated to the trunk (he said yes). But thats not the problem after just browsing through the site and looking at people pics i noticed in the pic he sent me that there is something not connected near the MAF and on others pictures that is where the bov goes and is connected to the intake.(sorry if i got the parts name wrong)
any ways if you look at the pic near the fuse box you will see what im talking about.

Info about the car 98 gst which he said has a 6 bolt swap.
he sent me the vin which i might run later.

here is the link to see what upgrades it as. craigslist ad

Purple eclipse gst gas saver NEEDS TO GO ASAP!!! - $5000 (Waukesha)

i dont know if 6bolt have the bov located in another spot
(it says what type of bov in the craigs ad)

if anyone has any info that could help me it would be greatly appreciated
 

Attachments

You must be registered for see attachments list
BTW, I traded my 02 camary for the current spyder that had no tuning software... Horrible move. Unless you plan on finding tuning equiptment on your ow.

I thought .040" over was maximum bore... That scares me. You'd need a new block if something ever happened to the block. i.e. timing belt snaps... Beware
 
:beatentodeath: on the venting to atmosphere... http://www.dsmtuners.com/forums/fre...tions/113858-venting-your-bov-atmosphere.html

This will clear that issue up. And will save you from catching a lot of flak here.

What are the "little" issues the car has. Get a complete list of mods. Ask him where he had parts installed and of there are any receipts. That will tell you a lot if he had them installed or did it himself. Doing it yourself, you have no chioce but to learn, and you'll more than likely be more careful on doing a good job...

BTW, what are you goals for this DSM? Are you looking for a DD, cruiser, autox or what? Knowing that will help us that are more familiar to DSM's.

Sounds like the timing might be off a little. Ask him if he's messed with the biss screw at all to try and resolve idle issue. The issue is 99% more than likely is because he is vented instead of recirculating. She looks about 80% stock on motor. He did a crappy job on spoiler swap. Still can see original low rise spoiler hole.



I posted it above i am only looking to make it my daily driver for the time being.
maybe spend a year with the car before i start thinking about modding it any further.
I just need a new car to get to and from school
 
Status
Not open for further replies.
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top