Aem tru boost not reading. Stays at .00

[Dsm559]

I installed my aem tru boost and it doest read anything. I have set all the program modes to my liking and still nothing and stays at .00 after taking my car for a spin. Just today while driving home I looked at the gauge and it read -45 or -44 then when I got home it read -50. I got home turned off the car, then turned the car back on and back agian reads .00 with no pressure. Does anybody know what seems to be the problem?

 

[gdb1039]

Sounds like you might have a faulty gauge. I use the AEM true boost and have not seen it do anything like that. Where do you have your vacuum line tied in at?

 

[Dsm559]

I have it tapped on to the intake manifold hose to the solenoid that controls the FPR.

You must be logged in to view this image or video.

 

[Dsm559]

https://www.google.com/search?q=2g+...C&biw=360&bih=615&dpr=3#imgrc=v0BzROu-b4BJOM:

 

[Dsm559]

Like that.

 

[Dsm559]

Sounds like you might have a faulty gauge. I use the AEM true boost and have not seen it do anything like that. Where do you have your vacuum line tied in at?

Think you can help me out on this one?

 

[gdb1039]

Looks like you have the vacuum line connected correctly. I would contact the seller that you bought the gauge from or AEM and see if you can get a replacement. Like I said I haven't had any problems with mine. Good luck man

 

[Dsm559]

Looks like you have the vacuum line connected correctly. I would contact the seller that you bought the gauge from or AEM and see if you can get a replacement. Like I said I haven't had any problems with mine. Good luck
man

I find out why my gauge wasn't reading. It's because my vacuum line was pinched down by the steering column where I had tucked the hose. So now it's reading correctly. Thanks.