2G 98 GST Fuel Pump Assembly Question

[DSM_Tohmez]

Upon trying to take the assembly out(Watched a video, turns out that it wasn't the right way) I ended up kinking one of the lines, which ended up splitting in half. I've searched for new/used assemblies but can't seem to find anything. Does anyone know where I can find one, or if anyone on here is selling one? Thanks

 

[ThunderChild]

What line do you need exactly? I might be able to find one, or at least give you some advice on fixing/replacing it

 

[DSM_Tohmez]

You must be logged in to view this image or video.

(Don't mind the mess )
But that center one

 

[ThunderChild]

I'll keep an eye out for sending units, but might contact Miller Import parts or @dacowgod to see if they can get you a replacement.

Other option is replacing that line with a bulkhead fitting and new high pressure line.

 

[DSM_Tohmez]

Found one on Miller Import parts. Guess I just didn't look hard enough, thanks

 

[Mauispyder]

You definitely watched the wrong video, that nut you were cranking on was brazed on. If your not taking tin snips to the body then you’re doing it wrong!

 

[pauleyman]

You definitely watched the wrong video, that nut you were cranking on was brazed on. If your not taking tin snips to the body then you’re doing it wrong!

I'm not sure I agree. I just hate doing that. It can be done without cutting. Does make it easier.

 

[Mauispyder]

I hated doing it. Maybe I also watched the wrong video.