The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

60-1 Base Safc Settings

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cfisher

20+ Year Contributor
451
4
Dec 21, 2002
olathe, Kansas
Just seeing what you guys are running. I've got a logger and have a decent tune but curious why others are around -38 or so on the same setup. Here are my settings. I know all cars are different. I've got 680cc inj, walbro 255, Aeromotive AFPR, ect.. mods are in profile. Anyone else running a RS60T off SAFC and how do I compare # wise. Any help would be really appreciated.

HI

1K -26
2K -26
3K -26
4K -32
4.5K -32
5K -32
6K -32
7K -32

LOW
1K -16
2K -18
3K -24
4K -30
4.5K -30
5K -30
6K -30
7K -30
 
There isn't much to say to this, unfortunately. Guys with similar setups will have their compensations within the relatively same range. A wideband and a means of altering timing would make a world of a difference.
 
I'm planning on DSMLINK in the next month or two. I was just trying to compare #'s with others that have a similiar setup.:thumb:
 
I have 650's with a 190 and a 50 trim running 24psi on pump gas.

My hi's are fairly similair to yours except I'm a little leaner, maxxing out at -38 up top.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top