Resolved 2G Connector B-59 FSM electrical diagram help

[GregoryRyan]

I am completely terrible at reading the FSM electrical diagrams and I am reaching out for some assistance from the community. After digging through the manual I finally deduced the connector I am looking for information on is B-59 (Body wiring harness and front wiring harness combination). I'll link the picture from the FSM referencing this specific connector. My specific ask is what wires are coming out/into this plug, as this connector was cut when I got the car and I am trying to trace back the wires to determine if I need to splice anything back in for anything interior-related. The car has no ABS and no cruise control. If someone could help me decipher the corresponding wiring diagram or give me some pointers on which diagram and how to read it for myself that would work as well. If any other information is needed on my part just let me know. Appreciate any assistance at all in this matter.

Connector B-59

You must be logged in to view this image or video.

Cut B-59 connector I am trying to determine wire information on

You must be logged in to view this image or video.

 

[Mello]

There are several wires on B-59 & they are all related to the ABS section of the FSM.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[GregoryRyan]

Okay, I did see these couple of wiring diagrams but couldn't make out exactly what the wires coming in/out of the plug were for. My brain doesn't compute how to decipher these diagrams. But if the car has no ABS then I can just leave the male end (uncut) unplugged underneath the passenger side footwell then? Just making sure nothing else was needed from these wires, like power/grounds for anything else. Either way thanks for the reply.

 

[Mello]

The plug has numbers for which wire is what. On the bottom of the pages there's the connectors with the pin numbers & color code for each of the wires. Just match the numbers & colors and follow them in the different diagrams to figure out out where the different wires are going to.