1G 2.0 control arm swap

[tarmacfriendly]

When my DSM was going through a much needed suspension rehabilitation I accidentally purchased the incorrect control arms for my 1.8. They are almost on the dot an inch shorter thus pushing my camber outwards. I used camber bolts to fix this problem. And welded my old a arm sway tabs onto the new control arms. I shortened the front ends width roughly 2 inches with this mod and has so far road well. No rubbing at full lock. Does anyone see any problems with this swap?

 

[FIBA M - EC17PSE]

Some pics to claify this would be helpful, always best to show us then tell us