I am still in search of a N/A engine harness for my 1993 Eagle Talon but I was able to find a turbo harness. What all would I need to do to be able to run a turbo engine harness on a N/A engine and ecu? I’ve read just an injector resistor pack and N/A fuel pressure regulator would need to be...

Hey, I'm seeing the K&N oil filter for the 420a N/A should be the hp-2004, orileys says this is the number I need.Now when I'm ordering it on Amazon it's saying it won't fit, but the black SO-2004 does say it fits but is showing 3/4in threads vs the hp-2004 which says it has 1in threads.To...

First time posting, a little sad, my reliable 2gNT Eclipse GS 420A I've had for the past 5 years that never cause me any issues hit a massive puddle during a sudden Ice storm in Montréal last week. The engine did not get flooded although the battery light turned on for a short minute, and...

My 1996 eclipse 420A is burning oil… big surprise. It’s got 126,000 miles I change the oil every 3000 miles. I don’t really have the money to pull the head, or do a rebuild. I’ve read some people use rotell while others are using 15w-50. I know thicker oils are just a band aid for burning oil...

Hello, I have been having trouble with my transmission. At this point I need it replaced but I can’t find anything out about transmissions. If someone could help me with the names and which ones can go on the 4g64. I have found a 2006 2.4 that I can rip the trans off but I don’t know if that...

Hello, I have a 1997 Mitsubishi Eclipse RS. I am dealing with an electrical problem dealing with the A/C HVAC control. I was driving one day and my A/C went out.Blower switch wasn’t turning on and the HVAC lights weren’t turning on. I took a look at the fuses in the interior. I saw that 10amp...

I’m looking for a place that could turbo or supercharge my 99 Spyder GS with the 2.4l 4g64. Does anyone know a shop in or around Portland OR that could do that?Or what kits are available for the 4g64?

I am new to this forum and have been looking at joining for a bit now. I dont own a DSM yet but i will be looking at buying a motor. I have been looking at stroker kits and bored over pistons for the 420a. I havent been looking at 4g's because i am scared how much a block might be(i live in...

Hi!I'm currently turboing an N/A eclipse, and well, the factory brakes look very small now to do the job. I read about some budget builds with 3000gt or evo brakes, but those cars are not very common to find in Europe. I also found out that the Mitsubishi Outlander rotors are compatible, does...

Unfortunately the day has come. After 3 very good years and 40,000 miles on the new motor, suspension and steering components have begun to fail faster and faster. I have many performance parts which I would much rather sell to some of you amazing folks than straight to the scrap yard. Parts up...

Bought it with a car, ended up not being compatible with my turbo Talon. Has been tested and is in working condition. Have listed it on Ebay, but would rather give it to someone on here if needed. $100.Reach me at 9043275221 (call/text) for a faster response. Will mark as sold once the item...