The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

1G Base Injector Data for FIC 775?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rdeis

10+ Year Contributor
71
24
Feb 28, 2013
Falcon, Colorado
Got my new FIC 775 High-Z injectors installed today, yea!

ECMlink website is down, boo! It'll start, but idle isn't stable.

What are the base Global Fuel and Global Deadtime deadtime settings I need to start with?

The injector data sheet shows much more than 775 tested flow, if I use the calculator should I use the tested value or the design flow value?
 
Turns out I needed this and a bit more. Just the values in this table got it to run, but it wasn’t very stable.

I reached out to FIC and got the InjBatteryAdj table values from them and they also suggested a -35 Global Fuel with no Global deadtime. That didn’t work either.

But the combination of adjustment/deadtime from the ECMLink table and the FIC InjBatteryAdj table seems to have done the trick.

Now to finish knocking out the rest of the little nits, couple more tiny boost leaks, need to make sure my fuel pressure is stable, etc, etc.
 
Last edited by a moderator:
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top