Will these parts fit my car?

[5280DSM]

Just wondering if these parts are interchangeable on a 1g. I am aware that some might require modification but I'm still getting used to these cars and also if there are any benefits to them
Evo 3 or 8 exhaust manifold
Evo maf sensor
Evo recirc bov
Evo 8 turbo
Evo injectors
Again I'm just curious and want to know what parts can fit on a 1g and if any benefits would arise from such, if possible, modifications.

 

[Bud92gsx]

Eco 3 exahust manifold yes..It's a direct bolt on..The evo 8 maniflod and turbo no,not withought mods..So deep pockets would help...Otherwise you need to find the search button ,and figure some of this out on your own..

 

[dsm92talonboost]

most parts from a evo 3 will work on a dsm not a evo 8 thoug, the injectors will aslo work for you!! you need eprom and a key diver chip set for 560s to run them.

 

[DJ23GSX]

Off the top of my head fuel injectors, fuel pump and maf can be used from an Evo 8/9 and are considered upgrades for a stock 1g. The injectors are a direct bolt on and fit without modifying anything although you'll need some way to compensate for the larger injectors like an safc, dsmlink or custom eprom chip etc. If you don't compensate for them then you will end up running really rich which won't give you any sort of performance gain. The fuel pump might need some minor modding to fit but it should be pretty simple. The maf will need to be wired into the 1g harness. If you can follow directions and can solder its not that difficult either. A few guys even use the front mount intercooler from the Evo 8/9 but thats going to require some modifying to fit as will any fmic. Don't quote me but I think the front brakes will work in a 1g as well. The evo3 exhaust manifold and evo3 16g turbo are direct bolt on's for a 1g too. The evo3 cyclone intake manifold will fit a 1g but its not exactly an upgrade unless you can control it correctly. I'm sure there are more but those are the only ones that interested me years ago.