where to buy a new banjo bolt

[zcoh2gdsm]

replacing my slave cylinder today i notice it didn't come with a new banjo bolt... no biggie, ill reuse the old one. have the brother tighten it down for me while im bleeding the clutch line and he says "ohh ####, it broke" (he clearly over tightened it) and now my car continues to sit on jack stands.

i've went to 4 local places today, ace hardware, advance auto, tractor supply, and my buddy tims (has everything you'd ever need... except this)

none of these places have it, it's the 10mm banjo bolt for the clutch line. is there somewhere that would sell this online or in a store that for sure has it?

 

[darkgant]

Try extremepsi.com they most likely gonna have it

 

[zcoh2gdsm]

they have the whole assembly for like $60, but i just need the bolt.

 

[19Eclipse90]

cough ... EXTREME PSI : Your #1 Source for In Stock Performance Parts ... cough ...



Edit: Whoops! Didn't read closely enough. That's for the turbo bolts, not slave bolt... My mistake! The part number is MD620446. They should be able to get a hold of it but you will likely need to call and ask.

 

[fourgsixthree33]

This may help you.

Clutch Slave Cylinder- 2G GST
(2x) bolts + lock + 14mm washer
Shaft Diameter x thread Size (mm) 8 x 1.25
Length (mm) 55
Thread Length (mm) 19
Head Size (mm) 12
Hardness 4

ColumbusDSM - 2G Turbo FWD Bolt & Fastener Wizard

 

[zcoh2gdsm]

19eclipse - i measured the bolt today and it was a 10mm nut m10x1.25 looks like what they have would work but according to the link 4g63 posted its not.

i might end up just calling a local guy doing a part out and buy his for like a quarter or something.

 

[Deuce_three]

If you don't wanna deal online, you could buy a brake banjo bolt with the same pitch pattern at any parts store and drill straight through the existing opening. That's what I did and had no problems with it.

 

[91gsx123]

Seems like something you could get from a junkyard pretty easily.