where to $ avid motor mounts

[Scoobystyl]

Where can i find the avid racing billet motor mounts for an automatic 2g? or can i use the manual mounts?

 

[Dsmkauai]

Pretty much any vendor on this site bro!! STM, extremepsi,jnz you name it they have it! http://www.dsmtuners.com/forums/vendors

 

[Jesse2012]

I bought mine from extreme psi, they have the best price. And no, you can't use the manual mounts

 

[Scoobystyl]

Extreme psi is sold out and stm wants 400 compared to extreme at 300 and they only have 75a and I want 90a ill check out jnz though

 

[Dsmkauai]

STM will price match and get anything you want FYI, you just have to ask

 

[Scoobystyl]

Oh nice well if thats the case ill have to call them Monday

 

[Dsmkauai]

I would its worth it!! Plus they only charge $5 for shipping!! Even to me in Hawaii!

 

[MJBean420]

Good Luck! From what I heard Avid went out of business. I sent them some money last summer for some mounts, and they been avoiding me ever since. A member on here black_gst just made a batch of the roll stops for us autos. Hit him up or look for the threads on them. They are good quality inserts.

 

[Scoobystyl]

I dont want to use stock mounts or find another that i lost somewhere...

 

[DSM IN MN]

Good Luck! From what I heard Avid went out of business. I sent them some money last summer for some mounts, and they been avoiding me ever since. A member on here black_gst just made a batch of the roll stops for us autos. Hit him up or look for the threads on them. They are good quality inserts.

Last summer I bought a pair of mounts from them. I do not know what you are talking about sir. Avid Racing | Engine Mounts | Traction Bars | Components

https://www.facebook.com/AvidRacing

Judging by they're website still being up and their Facebook page still remaining I wouldn't put money on them being out of business.

 

[J_HEATH]

I had an issue with the rear mount for my 1G auto. The mount was at least one inch too tall. I contacted extreme psi as well as Avid about this, the problem was never resolved by either party. This was a couple years ago. The trans and timing belt sides were fine. Also even with the 90a softer bushings it is a PITA to install, take off and reinstall.

 

[MJBean420]

Last summer I bought a pair of mounts from them. I do not know what you are talking about sir. Avid Racing | Engine Mounts | Traction Bars | Components

https://www.facebook.com/AvidRacing

Judging by they're website still being up and their Facebook page still remaining I wouldn't put money on them being out of business.

Did you try and contact them too? there are many websites that are still active even though the company's don't exist anymore. Same thing with facebook. I have 3 accounts and no body validates them either.

That was last summer. A lot has happened to the economy since then. I have even contacted Extreme PSI and they cant even get ahold of them. I have directly contacted Avid (via email) and they keep giving me numbers that no one will answer too. I have sent various emails and they keep giving me the run-around telling me to contact another person in there corporation.

Long story short, bad business all around. I bought some others from a another member/vender on the site, without the headache and hassle.

 

[daren_p]

Based on different stories I've heard in the past, I'd deal with one of our supporting vendors instead of direct.

 

[estoyaqui30]

I got a 4 piece set from JNZtuning. I eventually called Avid Racing and ordered a complete set of urethane inserts in the lower durameter, because the highest durameter was just too harsh.

 

[MJBean420]

You got a number for Avid? Can you PM it to me?

Much appreciated...

 

[estoyaqui30]

http://www.avidracing.com/contact-us/

They don't have they're phone number listed any more.

 

[MJBean420]

That's what I figured. I think they are having business issues and might be going under...