What am I missing from the 2g install kit?

[Big Bald]

I am a n00b....It looks like the oil return line + gaskets......I know i am missing the J pipe bolts and o2 gasket...anything else i will need for this install? What are these water lines i am reading about? Thanks in advance.....

You must be logged in to view this image or video.

 

[doodie]

You can probably use another oil return line gasket because if you reuse the old ones, they're just going to leak. You can take off the water lines on your old T25 and reuse them. Just flip them around and bend it a little by putting the turbo on and stick a thick screw driver against the block to bend it a little at a time. Get some longer coolant hoses to extend it to reach the water lines.

That looks like the SBR kit to me. My friend got it, and it was missing the same exact stuff.

 

[Big Bald]

it is the SBR kit.....

 

[Big Bald]

Well I just ordered a new Oil Return line, Crush Washers, o2 Gasket and Oil DRain Gaskets from forced performance. The stuff isn't expensive minus the oil return line...this ought to be a fun install. My understanding is that the water lines will be the worse part of this install.....is this true? Are 1g water lines better to use for the Big 16g? Also where can i get J-Pipe bolts and gasket from?

 

[blcknspo0ln]

take it up with mike at SBR,. i'm sure he'd take care of you. i got my j pipe with my 2g install kit. just didn't come with an oil return line. oh well. rigged it anyhow.

call them up and ask them to send you one.

 

[GSntncT]

An oil return line is it. Try to get one off a 94' GSX if you haven't gotten one already.