The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support STM Tuned

Turbo Blew!! Need some advice on new turbo??

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gstdud

Probationary Member
18
0
Apr 21, 2003
New_JerseyUS
hey guys,

Coming home from the mall yesterday my big 16g went. I am interested in maybe upgrading to a slightly better turbo but dont really wanna change all my other supporting mods. And i am really not sure what turbos would go with my current setup? so if you guys could give me your opinion would help out alot. Its a daily driver so a streetable turbo would be best.

my current mods are:
big 16g ported and polished, apex fmic,rc 550's, walbro 255lph, apex n1 catback, catco high flow cat, injen filter+RRE intake pipe,apex n1 downpipe, apex s-afc, greddy egt w/peak and warning, autometer phantom boost gauge and air fuel, proted exhaust mani and o2, extreme upper pipe, greddy type s BOV, extreme MBC, hks timer, AEM crank pulley

oh ya i have a 98 gst.

thanks alot guys
 
I would recommed going bigger, lag is your friend with FWD. I just upgraded from a b16g to a 50 trim well worth it imo. Make sure if you are going bigger though to have the supporting mods as well.
 
gstdud said:
hey guys,

Coming home from the mall yesterday my big 16g went. I am interested in maybe upgrading to a slightly better turbo but dont really wanna change all my other supporting mods. And i am really not sure what turbos would go with my current setup? so if you guys could give me your opinion would help out alot. Its a daily driver so a streetable turbo would be best.

my current mods are:
big 16g ported and polished, apex fmic,rc 550's, walbro 255lph, apex n1 catback, catco high flow cat, injen filter+RRE intake pipe,apex n1 downpipe, apex s-afc, greddy egt w/peak and warning, autometer phantom boost gauge and air fuel, proted exhaust mani and o2, extreme upper pipe, greddy type s BOV, extreme MBC, hks timer, AEM crank pulley

oh ya i have a 98 gst.

thanks alot guys


20g size range is what your looking for. :thumb:
 
Forced Performanc was upgrading t 18G's for $420. which is a great deal. It's like a baby 20G, with a 2mm smaller inducer. Check them out and maybe call and see what Robert will do for you. mark
 
They were doing that to TD 05 12a's from Starions a while back. Again I say call Robertand see what he will/can do. Of course the shaft must be good/reuseable. mark
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top