tranny mount on tranny chipped off, PLEASE HELP

[fastezz]

OK heres the deal the douche that installed my engine only bolted in the tranny mount with one bolt very loosley, over time it rattled out to about 1/3 the way to the top. Today it finally gave and cracked the top 1/3 in half, I have the piece the feel off but yea this broke both my axles. I drew a crappy picture of what happend on the tranny. My question is can I just get this welded back on by a quality experianced welder? I really dont want to have to buy another tranny. its so small it`ll just really bug me if it cant be welded back up. Also I need to know what the tranny mount bolt sizes are. I typed this once so im sorry if I leave anything out.

You must be logged in to view this image or video.

Ryan

 

[Mirage2LTurbo]

Weld it, you might have to tap or helicoil it afterwards.

 

[fastezz]

yea I was expecting that i might even have to get it retapped after, or eve heli coil. SO you think a weld will hold up?
Ryan

 

[Mirage2LTurbo]

A weld is stronger than the actual material, when done right.

 

[fastezz]

heres a few pics

 

[ndilo21]

the tranny mount on the bottom from of my tranny snapped and i didn't know it cause one half of the mount was connected to the frame and the other the the tranny and they were being held together by my clutch slave cylinder. I was drivin it pretty hard one day and all of a sudden my clutch just stuck to the floor. the slave cylinder couldn't take the stress and the mounts snapped. anyway one of my dads friends is a professional welder and he com over to out garage with an aluminum welder and welded it back together. he did a great job so i assume u could do the same if u get someone who knows what they're doing.

 

[fastezz]

yea dude im pulling it out as we speak and im gonna take it to a few different welding shops around to and see what they can do.
Ryan