throttle body gasket

[boostin92]

OK I have a 92 talon tsi awd and I am replacing the o rings in the throttle body but I can't seem to find the gasket that goes between the hard elbow and the front of the throttle body my local parts stores carry the gasket between the intake and throttle body but don't even show the other one so my ? Is can I buy two gaskets for the tb to intake and use them on each side of the tb I am sure the diameter of the tb is very close between the inlet and outlet of the tb and the same 4 bolts hold everything together so the holes should line up I mean I know its ###### not the 100% right way but its my dd and it needs to get done this weekend so has any one tried it
Thanks in advance

 

[miliman13]

i used rtv " the grey stuff" gasket maker. find it at local auto parts store. just make it.

 

[boostin92]

That's what I was going to do I figured this would be better with some sort of gasket cause I am doing all this to solve boost leaks.

Nobody else tried using the same gasket? I can't be the first peson that's thought about it

 

[Riceburning101]

i actually got rid of the gaskets bc they would leak and just used the rtv with much better results

 

[007jimmy]

I use the same gaskets for the TB and the elbow. Works perfectly fine.

 

[boostin92]

OK thanks I got the both gaskets and at 2.99 for each one if they leak I will throw them out and use rtv but thanks again hopefully the car will run better with no boost leaks