Supra SMIC and David Brode UICP will it work???!!!! PICS!

[SRiz]

Ok i just installed my SUPRA SMIC the getto way i used PVC and elbows.. and very restrictive and bad material ne way.... has anyone used the David Brode UICP on a supra SMIC install i know id have to cut it but my HUGE problem is .... ii dont have the supra elbow sooooo would the silicone clamp David provides, fit over SUPRA SMIC

 

[SRiz]

heres the brode... will that black thing fit over supra SMIC!!!! PLEASE HELP!

 

[allgripnoslip]

Give it a shot

 

[AWD90DSM]

im almost positive the outlets on the Supra SMIC are bigger than those on our SMIC's. Thats not to say you cant make this work though

 

[4geze63]

supra is bigger, just get a bigger coupler

 

[MindBlowin03]

The Supra outlet is 2.5" and so is the UICP coupling. Should work fine. I have the Supra and Brode setup on my 1G without problems.

 

[SRiz]

has anyone tried this... or does anyone have his pipe ..if so does the coupler stretch at all?

 

[SRiz]

ok is there ne where i can get couplers i tried PVC couplers and radiator hoes NOTHING WORKS where can i get it besides internet.... unless the david brode coupler stretches over it which would be cool ne one tried it?

 

[MindBlowin03]

Let me repeat. The Supra outlet is 2.5". As long as the Brode piping is 2.5" then the coupler will work.

 

[billdo_83]

Let me repeat. The Supra outlet is 2.5". As long as the Brode piping is 2.5" then the coupler will work.

And even if the piping was 2" you could get a coupler that goes from 2.5" to 2"

 

[SRiz]

talked to david he said its 2.25 and hes gonna check for me to see if it will fit over 2.5 ill get back to u guys wih results!

 

[billdo_83]

talked to david he said its 2.25 and hes gonna check for me to see if it will fit over 2.5 ill get back to u guys wih results!

You should also ask him if he can flare the end of the UICP out to 2.5"
Dejon was able to do that for my LICP that I ordered from them.