Squidskins

[L2RTSiAWD]

Originally posted by igs


Where you buy lexan window that fits correctly?

I need to remember the company name but there is a place that sells lexan replacements for all the glass on a dsm that's already pre-cut.

 

[igs]

is it these guys?

http://www.percyshp.com/sporcommolap.html

 

[igs]

Originally posted by 62-1gsx

nah the rear window dont just fit right in, like n2orbit said its made for race use only, and i am pretty sure the hatch is made for lexan windows that you rivet in, but you can do it with a lil modification like i am doin with the doors, nothin is impossible

Originally posted by motofool
i am a resaler for www.squidskin.com,

we can do hatches in CF and fiberglass,

they are setup to take your stock window glass,

they do not have any plumping for a wiper or spoiler (nice for talon guys no holes in hatch if u want to remove the toenail spoiler)

I wish we could get some pictures.

 

[whatpigsdeserve]

try here:
http://shopctc.site.yahoo.net/speedglass.html

 

[stock1g4g63]

Can you still have power windows, or windows that even roll up and down at all, if you use the fiberglass doors, and speedglass passenger windows?

 

[n2orbit]

im lost??? dude said he's a retailer for them... i do alot of stuff with him , and custom stuff... just so you guys know its not a big company.. its about as big as carbonwerks.. and if you want thanything done you have to give him some notice.. its a one man operation so don't think you can call up and say i want a hatch and in a week its at your door. you bet bet is to call him don't bs on here with peoplke saying there a retailer and all that bs..

 

[62-1gsx]

where did that motofool post at, i dont even see his post on this thread, is there another one on here other than this, Cus i would have 2 agree with N2ORBIT, cuz i tried to call them so be a retailer at my shop and they told me they cant do it, they wouldnt be able to keep up with the orders from another shop sellin them, and them haveing to make them..........

I wish i could find pics of that full drag eclipse(the white one with ACT) that runs a 7 something, i seen it at NOPI nationals last weekend in st louis or what ever that lil town is that the track is at(might as well be st louis) but it had all their stuff, doors, hatch, dash, and front end, it was bad ass until it hit the wall.....................

 

[igs]

Originally posted by 62-1gsx
where did that motofool post at, i dont even see his post on this thread, is there another one on here other than this, Cus i would have 2 agree with N2ORBIT, cuz i tried to call them so be a retailer at my shop and they told me they cant do it, they wouldnt be able to keep up with the orders from another shop sellin them, and them haveing to make them..........

http://www.dsmtuners.com/forums/showthread.php?s=&threadid=35044&perpage=25&pagenumber=2

 

[Brian]

So there dash doesnt look like a regular dash you see in a normal everyday 2G dsm or it does look the same but its made out of fiberglass and needs painted.

 

[62-1gsx]

Originally posted by Brian
So there dash doesnt look like a regular dash you see in a normal everyday 2G dsm or it does look the same but its made out of fiberglass and needs painted.

i am pretty sure it looks the same, just fiberglass, if its the same one i seen ine the act drag car, they said they got everything from this place, when we talked to them at nopi two weeks ago

 

[Brian]

Alright if it looks the same then thats cool, but do you know if everything fits in it and it has all the same brackets as a regular dash or would you not be able to get everything in there

 

[62-1gsx]

Originally posted by Brian
Alright if it looks the same then thats cool, but do you know if everything fits in it and it has all the same brackets as a regular dash or would you not be able to get everything in there

i dont know if thereare any brackets with the dash, as far as i know its a shell, you have to cut the holes out. i am sure you can get everything to fit with some modifications, all the holes are in the same spot, the dash looks identicl, like i said you have to cut the holes out though

 

[Brian]

When you say cut the holes out, are you talking about having to cut the holes for the vents and gauge cluster and stuff. Just checkin

 

[62-1gsx]

Originally posted by Brian
When you say cut the holes out, are you talking about having to cut the holes for the vents and gauge cluster and stuff. Just checkin

yeah whe holes are there but they need cut out

 

[n2orbit]

his dash was different than the stock dash.. looked like a nascar dash but carbon fiber

 

[62-1gsx]

Originally posted by n2orbit
his dash was different than the stock dash.. looked like a nascar dash but carbon fiber

what do you mean it looked like a nascar dash?

i just seen it 2 weeks ago, and was in the car(didnt get to sit in it, but leaned in and looked through it) and the dash that was in it looked identical to stock, but was painted white, and had none of the holes cut out.......i know i wasnt seein things man(ITS WAS BRENT RAU'S, the worlds fastest (RWD)eclipse) we were talkin to the guy like 20 minutes before he smacked the wall

 

[n2orbit]

the dash i saw was flat looking and had cut out for some gauges and etc... but nothing else.. didin't have anything to put the cluster into.. but he could have made one.. i said he has made custom parts for me.. i have a 96 eclipse and i have a 97+ oem carbon fiber front bumper.. you give the guy anything that doesn't have any inperfections he can make it out of carbon fiber, my ducati has tons of stuff including the gas tank..