Say Something About The Person Above You

[2GbTalonGuy]

probably wants a boosted dizzum.

 

[avenged5]

Can read my fvxin mind. (or see my hard on for his car?)

 

[GsXdSmKingGsX]

Gets his rods all bent up when he see's a boosted DSM.

 

[avenged5]

Should know i have a thing for evos as well

 

[2GbTalonGuy]

Probably has a woodrow thinkin about dsmking's Evo as well.

 

[GsXdSmKingGsX]

Knows you have to be sick and twisted to get hard off of looking at a car

 

[gst96spyderman]

should help out on my rebuilding head thread

 

[GsXdSmKingGsX]

Knows Ill check it out and give him my 2 cents

 

[gst96spyderman]

should put two cents here

http://www.dsmtuners.com/forums/newbie-forum/385440-overheating-rebuilding-head.html

 

[2GbTalonGuy]

Seems to have as many problems with his spyder as I do with my Talon.

 

[gst96spyderman]

Should also put his to cents in on what to do

http://www.dsmtuners.com/forums/newbie-forum/385440-overheating-rebuilding-head.html

 

[2GbTalonGuy]

should know my opinion is go big or go home.

 

[dented_coffee]

Knows what to say toany question or problem .

 

[Gs Dewd]

Needs to check his starting problem and see if he needs a stater or flywheel.

 

[avenged5]

Needs to fund my turbo project too.

 

[gst96spyderman]

should come down to Blairsville GA and help me replace HG and friends

 

[dented_coffee]

Needs to check his starting problem and see if he needs a stater or flywheel.

Should know that now I might have bigger problems now ! I think I found the starter noise problems, and the ruff idle . I'm missing the trans to engine dowels on both the front and the back of the trans . So it's not aligned properly and the trans is sitting about 1/8" to 1/4" lower than its suppose to .

The torque converter is mounted in the crank bushing to center it with the crank to prevent it from viberating so it's on center while rotating. Because thats mounted solid and the trans is a bit lower than its suppose to be the front pump seal that rides the torque converter is beeing smashed into the top of it leaving a gap on the bottom for all the trans fluid to gush out of .

So now I have over $70 in ATF soaked into the ground under my talon, I did find one spare trans to block dowel. I now need to find some one whos willing to donate one to me before it snows so I can throw some cheap ATF in there to make sure my front pump seal isn't bad, and no damage was done to anything .

Also should know that I'm SOL on getting the rest of the parts that I was never given in the swap for all my 5-speed stuff for all his auto stuff . So now I'm on my own to figure everything out and fix it all myself.

 

[DSMTyson]

Has tough luck.

 

[dented_coffee]

Knows it's all part of the contract you sign when you buy a DSM .

Should know that my problem wasn't gonna get a correct answer for a long time if I didn't find out that the dowel pins were totaly MIA .

Should also know I made a dowel out of some old DSM aluminum A/C tubing .

Lots of measuring of different piping and steel parts to find the inside diamater of the AC pipe is perfect just a bit of shaving of the outside to get it to spec. So no more need of the dowel because I made one.

 

[GsXdSmKingGsX]

Knows Im getting back into the DSM game.. I couldnt go a month without having another one.. Damnit Im addicted

 

[2GbTalonGuy]

Shares the same addiction as the rest of us. And probably shouldn't have sold his DSM in the first place.

 

[EDM95]

Got 2 many talons.

 

[GsXdSmKingGsX]

Knows Im buying a silver 97 GSX

 

[2GbTalonGuy]

Got 2 many talons.

Is that even possible??

^ Should be careful and be sure he is buying a good one.

 

[EDM95]

Don't know I about bought a greenishblue talon but the guy was acting like a f'n tool and telling me it was a Mitsubishi and not an eagle and asking me wtf is a 4g63 or 420a. I was like ok let me see the motor dumb mother fkr took me inside the shop and said what one do you want me to install in it if I buy it. WTF That's a f'n 350 small block and two of them dumb ass idiot.