Rear upper knuckle bushing question

[SuperFudge]

Hi again, my 95 Eagle talon has a rear rotten/trashed upper knuckle bushing and most shops tell me that I have to change the full damn knuckle. BUT I came across these guys
http://cgi.ebay.com/ebaymotors/TALO...its=Year:1995|Model:Talon&hash=item53dd267906
I was wondering if those would work? I just want to make sure before I buy anything.
With those they should slide into place once the old one is removed right?
Has anyone ever delt with these before?
Any imput would be appreciated
Thanks
--Fudge

 

[RogueTalonTSI]

Yes these will work fine. My only words of wisdom are "Lube them up VERY well before installation!" I didn't when I did mine and they squeeked like hell.

 

[SuperFudge]

Will do!
Has anyone else used or had any experience with these eBay bushings?

 

[97gst_spyder]

I used the Prothane total kit.

 

[housegsx]

Will do!
Has anyone else used or had any experience with these eBay bushings?

They are Prothane bushings.

 

[95TalonOwner]

I've had the ebay ones in my car for 5 years now. They squeak when it's cold out so make sure to lube them generously.

 

[SuperFudge]

-Stupid question-
Now seeing that the bushings are in two pieces per side, would this affect the structural integrity of the bushings?

 

[RogueTalonTSI]

No, two piece bushings have become the norm anymore. The metal sleeve helps distribute the load across the whole bushing.

 

[SuperFudge]

Ok I'm going to go ahead and order them today.
http://cgi.ebay.com/ebaymotors/TALO...its=Year:1995|Model:Talon&hash=item53dd267906
I just wanted to say thanks for all the input guys!