Post those little welding projects

[Gamble97]

Post those little welding projects that don't need their own thread.

Got bored and had nothing to make so I made a handle for my harbor freight welding cart. beads are a little tall but it's not like it's load bearing or anything.
1/2" round stock and a piece of angle iron.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[dsmTripp]

Well here is my little projects... keep in mind im a first timer. So i got bored and hadnt used my harbor freight welder yet so i decided to play around. First thing some kind of little box. Then i got even more bored so i made a lamp. As i said keep in mind as you look at the pictures that im a first timer with literally no knowledge of what im doing.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[phizzalot]

Nice I recently used my 80amp harbor freight arc welder for an exhaust stud removal. Weld was strong enough to hold the impact wrench movement.

 

[Gamble97]

^Looks good! I tried making a box last night but for the life of me getting something cut square let alone 4 pieces is impossible for me.

 

[dsmTripp]

I actually used six peices for the box 1 for each side the my occasional ocd kicked in and i wanted the bottom to have the split in the middle rather than of to the side due to the scrap i was using was to small to cover the bottom. So it has two pieces. To get it squared i used the nifty harbor freight welding magnets that are 90° angles.

 

[kicker91laser]

304ss throttle body elbow w/tial flange and npt bungs for GM IAT and meth injector nozzle:

You must be logged in to view this image or video.

You must be logged in to view this image or video.