The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Omaha/Council Bluffs/Surrounding DSM Owners

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

so... got the afrp in and installed took it around the block... went to check and make sure the fuel pressure was still good.... SEEN OIL ALL OVER THE TRANNY AND LEFT SIDE OF THE BLOCK.... this car is really starting to get to me.
 
man were is kearney? im down for a meet
never mind almost 5 hrs away that blows maybe next time
 
5,000 people, 9 cops. All of which will pull you over for not using your turn signal. Lame

Hah! Got you there Brian, Hildreth-365 people, 1 town cop. Although there seem to be an abundance of state patrol around there lately. :notgood:

Been awhile, you still rockin KRP all by your lonesome? I'll have to make it down sometime soon, as soon as my car is running again. I've changed a few things. :hellyeah: Just to break some more.
 
I'm hopefully putting on a new DEJON exhaust this weekend. Dave said it was shipping tomorrow so it might make it in time. We could all meet up and see how many DSMers it takes to screw on a downpipe.

The answer would be one since only one of us could fit under there and the rest would be standing around looking at all the things they have to get around to fixing when they get back home.
 
+1 for the standing around while you work j/K let me know where and when your going to do it and ill bring the 1g down.... need to borrow your logger anyway.:thumb:
 
btw i might be taking my car to chad at 3d to get some stuff done... its leaking oil out of the tranny side of the block and i cant figure out where the hell its comming from... its not the valve cover... not the cps... not the inlet or outlet of the turbo lines.... its in the middle of those.... i cant find it... any ideas?? i dont really think its the head gasket but who knows.:banghead:


Just dropped my car off with chad... i know he will make it all better... the worst part is that he knew what was really wrong with my car before he has even heard it run... got to get a new ecu!! its just a sign for me to get a eprom'ed ecu so i can run dsmlink!!! and he is going to figure out whats leaking...
 
btw i might be taking my car to chad at 3d to get some stuff done... its leaking oil out of the tranny side of the block and i cant figure out where the hell its comming from... its not the valve cover... not the cps... not the inlet or outlet of the turbo lines.... its in the middle of those.... i cant find it... any ideas?? i dont really think its the head gasket but who knows.:banghead:


Just dropped my car off with chad... i know he will make it all better... the worst part is that he knew what was really wrong with my car before he has even heard it run... got to get a new ecu!! its just a sign for me to get a eprom'ed ecu so i can run dsmlink!!! and he is going to figure out whats leaking...

Yikes thats expensive. Sorry to hear that man. FEDEx says the exhaust is coming in tomorrow so if it does I'll PM you a time and place. You can use my logger if you bring the 1g so we can show off :p

On another note.. I've heard a lot about Chad and 3D, but I have no idea what or where it is. Insight?
 
I'm hopefully putting on a new DEJON exhaust this weekend. Dave said it was shipping tomorrow so it might make it in time. We could all meet up and see how many DSMers it takes to screw on a downpipe.

The answer would be one since only one of us could fit under there and the rest would be standing around looking at all the things they have to get around to fixing when they get back home.


Dont you mean all the stuff we have to fix so the car will make it back home?

Im game if I am free. when do you think you will be working on it?

Brian
 
Yikes thats expensive. Sorry to hear that man. FEDEx says the exhaust is coming in tomorrow so if it does I'll PM you a time and place. You can use my logger if you bring the 1g so we can show off :p

On another note.. I've heard a lot about Chad and 3D, but I have no idea what or where it is. Insight?

Chad is the owner of 3D. The shop is in Council Bluffs. He has been in the game for a long time. I have known him for almost 9 years. He is the go to guy for anything DSM!
 
Yikes thats expensive. Sorry to hear that man. FEDEx says the exhaust is coming in tomorrow so if it does I'll PM you a time and place. You can use my logger if you bring the 1g so we can show off :p

On another note.. I've heard a lot about Chad and 3D, but I have no idea what or where it is. Insight?

i dono how expensice it will be... i know i have to get a new ecu so thats like 300... he is checking the oil leak tonight or tomorrow... if i get it fixed by the weekend ill bring it but if not... might have to roll in my moms civic... and i think im going to buy my own logger its like 115 shipped from that site u sent me... pm when u know when ## going to have ppl to watch u put your exhaust on...
 
Decent night at MAM last night. There were one or two DSM's, and a couple STI's (one of which I got the pleasure of walkin on the way to the track).

Nice kid with a 2g there, dont know if he ever got into the 7's, but maybe he's one here.
 
Decent night at MAM last night. There were one or two DSM's, and a couple STI's (one of which I got the pleasure of walkin on the way to the track).

Nice kid with a 2g there, dont know if he ever got into the 7's, but maybe he's one here.

Goin next week?

It looked like it was going to storm so I made plans with my girl and it ended up just being a bit chilly out. Kinda sad I missed out, but I had fun and it sounds like yall did too:hellyeah:
 
I go to MAM as i have an agreement to contract my welding business through there, but since i'm FWD i wont evne bother to take the car. Ido wheelies on the bikes when they are cleaning the tack and to me that's all an 1/8 mile is good for... My car don't even come alive till after the first 1/8th LOL

But then again i don't have AWD like you lucky buggers do either LOL
 
Whats up? The name is Phil, From Council Bluffs. I just signed up on this Fourm today, I was on NESS tryin to sell some stuff and some how i came across this site so i desided to join, I have a 92 TSI All wheel, I bought this car for 200 bucks running and driving, it was bone stock, so far i have a B/R evo II 16g, B/R 3in Turbo back, 55cc injecters, Walbro 255, and by lookin around thats just the norm now days LOL, still waitin on my FMIC.


Thanks
-Phil
 
a buddy and i were gonna make our way mam friday night but of course his talon being a dsm and all it broke LOL chasing down electrical demons. hopefully we will be able to make it down this friday maybe meat some fellow dsmers.
 
I go to MAM as i have an agreement to contract my welding business through there, but since i'm FWD i wont evne bother to take the car. Ido wheelies on the bikes when they are cleaning the tack and to me that's all an 1/8 mile is good for... My car don't even come alive till after the first 1/8th LOL

But then again i don't have AWD like you lucky buggers do either LOL

The same reason I dont run my car there... until i get the 2 step. turbo is just getting warmed up by the end of the 8th
 
Whats up? The name is Phil, From Council Bluffs. I just signed up on this Fourm today, I was on NESS tryin to sell some stuff and some how i came across this site so i desided to join, I have a 92 TSI All wheel, I bought this car for 200 bucks running and driving, it was bone stock, so far i have a B/R evo II 16g, B/R 3in Turbo back, 55cc injecters, Walbro 255, and by lookin around thats just the norm now days LOL, still waitin on my FMIC.


Thanks
-Phil

Welcome Phil...

Sounds like a good find on your car, are you running any fuel control on your car, or a fuel pressure regulator?

We have been trying to get the Omaha metro dsm'ers a little more active, so its good to see you found the board.

Brian
 
Welcome Phil...

Sounds like a good find on your car, are you running any fuel control on your car, or a fuel pressure regulator?

We have been trying to get the Omaha metro dsm'ers a little more active, so its good to see you found the board.

Brian

You're doing a good job at it. 3 of us in the same garage is a new record for me. ROFL
I'm planning on MAM this friday if they don't screw me over at work..

Also, welcome Phil, nice to see we have more people joining up here:thumb:
 
You're doing a good job at it. 3 of us in the same garage is a new record for me. ROFL
I'm planning on MAM this friday if they don't screw me over at work..

Also, welcome Phil, nice to see we have more people joining up here:thumb:

haha yea three dsm'ers to put on an exhaust.... that was fun... im getting my car this week hopefully... ill be down at mam if it dont rain or something stupid


WELCOME Phil... it is good to see some more active omaha members...
 
Thanks for the welcome guys :thumb:, I just found out today that im goin to be losing my D/L AGAIN :notgood: but this time for 6 months so its goin to suck ass gettin my Talon done and not being able to hear it spool LOL, Is there anything else i should do to my car? from where im at now?


Thanks
-Phil
 
Hey guys, i finally got my talon up and running again. My problem ended up being my ecu had a fried capacitor and i had a fuel injector insulator broken in half. So last night i got my new bc 272's and bc valve springs and retainers installed. it sounds nice with the lobe now.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top