The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

My night at the track ... **video now**

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

NewB2dsm

20+ Year Contributor
910
4
Jun 25, 2002
St. Louis, Missouri
Well i got my TRE tranny, new clutch and flywheel in. SO i was really wanting to see if i could pull some better times. So i went last night, loaded up with 110 octane race gas. Turned the boost up to about 24psi or abouts and made two pass's. At this point i was kinda upset with the track, i was spinning in 1st gear. I still got ok 60fts but im usually in the 1.6's all the time. Anyway here are my 1st and 2nd pass, notice the 60fts.

You must be logged in to view this image or video.



So i was like screw this and got a little upset with myself beacuse if i could have got my 1.6x it could be right at 12.0-12.1 id think. Anyway, my freinds srt4 made a pass and i knew his car is fast. But he ran a 12.22@119mph. So that put a little kick in my ass to go out one last time with 1psi more (so 25psi and falling very very fast) Everything seemed to be good except i got a little wheelhop off the line. And when i got back i had my new fastest time, with still the same decent 60ft.

You must be logged in to view this image or video.


Only if i could have pulled my normal 1.6x :(

The small 16g just keep getting a little better each time.

here is the video...
http://onclickpix.com/d156-5AF2DA
 
Damnit Kyle! You give me hope, well sorta. My car will never be fast but just to see you doing it on almost the same setup gives me hope. Hopefully my cams will be in soon and I can tune this pig. :thumb:

EDIT: Haha, you can't even hear your car over his.
 
yea, i am happy with my times but with a better 60ft times could be better of course.

And i do think i will be putting a 1g intake manifold on the car and porting the head to match it. So maybe get this pig down barley into the 11's
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

Back
Top