The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Rix Racing

2G Manual Boost Controller, not pushing any more boost

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Kai Hefner

Freelancer
480
272
Jun 21, 2018
Calgary, AB_Canada
Hey all,
I read an older thread about a cheap manual boost controller that actually worked. This one: https://www.amazon.ca/Manual-Boost-...49498443&sr=8-1&keywords=nxs+boost+controller
I’ve decided to buy it to see how it works for me. After installing, I tried to turn to change how much boost I was pushing. After some tests I ended up turning the boost controller end-end with little to no change in boost pressure.
Do I maybe have it hooked up wrong? The bottom line is going to my wastegate and the top one is going to a nipple on my intercooler piping. I’m running an evo3 16g.
 

Attachments

  • 079C09C1-415A-40F5-9227-11FF03B60DA9.jpeg
    079C09C1-415A-40F5-9227-11FF03B60DA9.jpeg
    1.8 MB · Views: 134
its a knockoff turbosmart MBC so just go by the turbosmart install guide

You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
A friend of mine had that Turbo Smart unit. Never cared for it. He had some odd issues that made no sense. Talked him into a Hallman and issues went away.

Hopefully you have a better experience with it than we did.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top