HTA fp green users come in.

[kidtsi]

Anyone running this turbo? im installing this turbo today but i cant find what is the size and threat of the turbine housing where the 02 housing goes. I tried m10x1.25 and m10x1.50 but no luck, please if anybody knows let me know i just have today!!!

 

[agentorange313]

Since its a mitsu turbo housing I think all the thread sizes are the same.
I believe the size is 10mm x1.25.

These are the bolts you need (bottom of the page o2 housing bolt):
FFWD Connection - Race Injuns That Will Freeze Your Brain

maybe you can call FFWD and ask them the specific thread pitch.

also read this:
http://www.dsmtuners.com/forums/bolt-tech/335405-thread-size-o2-housing-turbo.html

 

[boosteclipse]

Same thread as stock, not sure the thread size, but factory replacments fit mine.

 

[xezerax]

I had to run a tap through the turbine housing bolt holes of the last two pte turbos i purchased new, not really sure why but yea, should be the same as stock

 

[JusMX141]

All MHI turbine housings are 10mm x 1.25; I've seen some of the knockoff housings that are 10mm x 1.5, but this shouldn't be the case on a FP turbo even if the turbine housing is not Genuine MHI.