Help identify these parts

[dewoof01]

I took apart my whole intake and coolant system to rebuild and modify and that was a month ago and I have 2 pieces I don't know what they are...

First, trying to figure out what this bracket is I think it was around the battery area but can't remember.


Second, is this tube. I know it used to hook to the old stock TB nipple, but i have a jeep TB now so i know its a vacuum line but I'm wondering what this tub is for first off. Second I deleted my EGR and have a nipple free on my intake vacuum tree, can I just connect this one to there and pull vacuum there? Thanks for the help.

 

[VelocitàPaola]

I don't recall where that bracket is supposed to be, and I don't see it after a quick search in CAPS. The vacuum hose goes to the EVAP system. Since you already removed the EGR system, emissions must not be a concern (i.e. the car is for off road use only), so I'd recommend removing the EVAP system as well.

 

[inthemidst]

The bracket is the intake manifold brace it goes underneath the manifold attached to block.

 

[VelocitàPaola]

The bracket is the intake manifold brace it goes underneath the manifold attached to block.

Actually, I think it's the exhaust manifold bracket. Take a look at PNC 13007 here:

http://www.2gnt.com/CAPS/main15/main15sub310.html

The intake manifold braces don't look like that.