Greddy Turbo Timer

[98SilverBullet]

I own a 98 GST Spyder with the stock alarm, Injen Intake, and Turbo XS h34 BOV (if all that even matters) I wa slooking at purchasing this turbo timer LINK

and heres a link for the harness LINK

Plus any link to your pictures of how and where to mount it, or any suggestions would be great.

 

[Denji]

i just double sided sticky taped it below the steering wheel on the right side next to the center console. Kinda right above where your right leg woul dbe if you were driving. I like it there, lots of people put it on top of their steering wheel though. I dont think a picture is really necessary for either of those suggestions, but if you would like one i can post it. If you want your stock alarm to work correctly you will need to do some rewiring.

http://ca.dsm.org/FAQ/2gtt-faq.html

click there and your ready to go.

 

[Denji]

http://www.greddy.com/tech/FATURBO_TIMER.pdf

Also, the intructions are in japanese thate are included with the greddy turbo timer itself, here is the english version of the instructions. That should be everything you need!

 

[Fabian972]

I would take it to a car stero place and have them flush it to the far right side of the cigarette lighter that spot should be big enough for or turbo timer or even a boost controller it will look smooth better than Mcgyvering it

 

[stirpicult]

i just double sided sticky taped it below the steering wheel on the right side next to the center console.

this is where i have mine as well, but i got some plasic velcro crap from advanced to attach it with. this way i can pull it off when i pull off the lower dash. that, and the double sided stuff became not so sticky and it well off when i was driving one day.