Fuel filter upgrade ?

[purplehazetsi]

Ok im looking to do a fuel filter upgrade like the one that auto alchemy sells. But i get the fittings for really cheap and want to make my own. does anyone know exactly what fittings i will need to make one like this:?????



http://flyservers.registerfly.com/members5/autoalchemy.com/catalog/DSM_0101_HFFDS.html

 

[blue1]

Something sounds wrong in the ad! it states, it filters 4 to 5 gallons an hour! to me thats not high flow when your pumps are pushing up to 190 to 255 litres an hour. i am sure that a 2litre at 7000rpm would use more than 4 to 5 gallons an hour, so if the ads correct i dont think it will flow enough for even a 12 sec burst on the strip. the sintered bronze is a good filter but does block easily because it doesn't have the surface area of filtering the paper filters have. At 45 psi it might be 4 to 5 gallons a minute!

 

[Defiant]

I'd not heard of the stock filter being inadequate.

 

[purplehazetsi]

umm, i just asked if anyone knew thew exact fitting size that will fit on the stock fuel line ( the threaded part that threds into the bottom of the stock fuel filter)

 

[doug]

I believe that's an Earl's part number 9894DBH. It's a 14mm x 1.5 female to -6AN male fitting.