The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Ebay Exhaust Thoughts/Ideas

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I know alot of people running them with great results, if your on a budget its the way to go
 
That's the exact same setup I will be running on my car. I'd say, go for it. Exhaust is just bent tubing, look for the correct type of bends (Mandrel) and correct size (2.5-3.0") and you're good to go.
 
http://www.roadraceengineering.com/eclexhaust.htm
http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=589

Go with the 2G short downpipe for 230, then Id do my own 3 in piping behind the cat for about 50, then a magnaflow muffler to finish it out.

You're gonna have to do a bit of welding and bending (you can pay someone to do it for fairly cheap - like a local community college), but this will save you some money. I know you're thinking "no it wont". Think about it this way...for the entire catback, you'd be paying 250 with shipping. With my catback, you'd pay 167 if you get your muffler from justmagnaflow.com/

Remember: enter 14329 into the part number search.
 
I have that exact same downpipe.. Works great, also for those that dont already know, its the same thing as a Megan Downpipe. They are made by the same company and sold under different names. Its like another guy said, piping is piping. If you are on a budget its the way to go.
 
If any one has any pictures of any cars (gsx/GST) with this exhaust system installed please let me know looks like a grate deal, i was thinking of dropping about 600$ on a new exhaust but hell if i can get this one for less then half the price then im sold, i dont want anything that will get the cops looking at me tho, i might paint it black so make it look stock. i dont know i need to see some pictuers.

THanks guys!
 
I had the TSUDO catback on my 97GST. It sounds great and there's a definete hp gain but it's not a full 3" catback. Most of the piping is 3" but the muffler inlet is 2.5" with a 4.5" outlet.

From 1-10 I'd rate it a 9 It's definetly a good buy

kawboy said:
Does this exhaust have a bung for the rear o2 sensor?

Thanks again

Yes it does
 
The only thing I didnt like was the rear section of the exhaust goes OVER the rear end. Its great if your lowered cars, but mine SOMETIMES hits and makes a ting sound. Its took less time to put it in then to take the old exhaust out. I love it and its not to loud if your worried about cops. I measured the smallest part and its 2 5/8. Dam good enough for me.
 
Here are some close ups of the catback.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
kawboy said:
Will the Tsudo exhaust bolt right up to your stock cat or do you need an extra piece?

It will bolt right up, that last picture is where it necks down to fit onto the stock cat outlet.
 
tranceman said:
Here are some close ups of the catback.

You must be logged in to view this image or video.


looks good... however, I'd take the silencer off. :)
 

Attachments

You must be registered for see attachments list
Bo0O0ostedDSM said:
looks good... however, I'd take the silencer off. :)


Yeah, I took it off immediately after installing it while the car was still on the lift. Those pics are the first night I got it and was just piecing it together on the dining room carpet. :dsm:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 Forge Motorsports BOV
    Original Forge Motorsports bov. Adjustable with over 80 clicks on the dial. Nice to use for...
    • Galant665
    • Updated:
  • Wanted 1g 1991 Black Cherry Eagle Talon
    5-speed
    • bamatalon
    • Updated:
    • Expires
  • For sale Misc Left Over Parts
    Hello, I have a few left over parts for sale, these do not include shipping, please pm me for a...
    • r3dmak
    • Updated:
    • Expires
  • For sale Alpha Injection Clinic 2200cc for 4G63 DSM/EVO
    I have a set of Alpha Injection Clinic 2200cc high z injectors for DSM/EVO. I am stepping up to...
    • spoolinpos
    • Updated:
    • Expires
  • Wanted WTB 2g half rad
    ISO of a 2g koyo half rad or something equivalent.
    • Michael Wucher
    • Updated:
    • Expires
Back
Top