NeverEndingProject
Proven Member
- 40
- 0
- Dec 11, 2012
-
Troy,
Michigan
Hello everyone, just posting leftover parts from my build that were either replaced by other parts or returned back to oem. I can send more pics if needed. Also, I will ship at buyers expense.
PRICES ARE BEST OFFER, SEND ME YOUR BEST OFFER
1. Greddy Intercooler: $500 obo
-SMIC w/2.5" piping, very lightweight intercooler, i.e. a Hahn FMIC weighs nearly twice as much as this Greddy intercooler
-Also, the piping allows for install without having to cut the bumper support or relocate the coolant tank
-Condition is good but could be better in one small area of radiator, there is some damage to fins in center due to how intercooler was mounted.
-The piping was powder-coated candy apple red and looks real nice. I never installed the intercooler after powder-coating since I needed to change to 3" piping, the piping itself looks almost like new, no scratches or dings.
2. Matrix Racing Seats: $200 for both
-One seat will come with a seat bracket already installed (meant for 2g chassis)
-These sell for $180 each online before shipping
-Condition is good except there is one hole on one seat on lower back support smaller than the size of a dime, then one small rip on side next to lever, not visible when mounted.
3. Gray 98 eclipse Dash: $50
-wiring harness is still in tact in dash, need to buy your own hardware (screws/washers) to install as I lost track of mine, shouldn't be more than $5 for hardware, dash itself is in good condition
4. Gray center piece with leather shift boot: $30
-good condition, leather boot itself would benefit from quick cleaning
-no tears in boot and no cracks in plastic
5. 20mm wheel spacers: $40
-5x114.3 bolt pattern
6. OEM 2g dsm radiator fan: $15
7. AEM Twinfire 4 channel ignition system: $260
-comes with mounting bracket and wiring harness measured out to fit in trunk in proximity of battery
-module itself has no rust, just the mounting bracket does so could use quick sand and spray if you want it to look clean in trunk
8.Lastly, I Have a set of Ross Pistons 8.5:1 (1,000 miles, some knicks on head could be reusable not sure therefore the low price) on 1g rods, if interested let me know and I'll text/email some pictures -$200
Thanks for viewing, if interested please send me a message through here or text me at 248-835-3529. Thank you, have a nice day
Located in Byron Center, Michigan
PRICES ARE BEST OFFER, SEND ME YOUR BEST OFFER
1. Greddy Intercooler: $500 obo
-SMIC w/2.5" piping, very lightweight intercooler, i.e. a Hahn FMIC weighs nearly twice as much as this Greddy intercooler
-Also, the piping allows for install without having to cut the bumper support or relocate the coolant tank
-Condition is good but could be better in one small area of radiator, there is some damage to fins in center due to how intercooler was mounted.
-The piping was powder-coated candy apple red and looks real nice. I never installed the intercooler after powder-coating since I needed to change to 3" piping, the piping itself looks almost like new, no scratches or dings.
2. Matrix Racing Seats: $200 for both
-One seat will come with a seat bracket already installed (meant for 2g chassis)
-These sell for $180 each online before shipping
-Condition is good except there is one hole on one seat on lower back support smaller than the size of a dime, then one small rip on side next to lever, not visible when mounted.
3. Gray 98 eclipse Dash: $50
-wiring harness is still in tact in dash, need to buy your own hardware (screws/washers) to install as I lost track of mine, shouldn't be more than $5 for hardware, dash itself is in good condition
4. Gray center piece with leather shift boot: $30
-good condition, leather boot itself would benefit from quick cleaning
-no tears in boot and no cracks in plastic
5. 20mm wheel spacers: $40
-5x114.3 bolt pattern
6. OEM 2g dsm radiator fan: $15
7. AEM Twinfire 4 channel ignition system: $260
-comes with mounting bracket and wiring harness measured out to fit in trunk in proximity of battery
-module itself has no rust, just the mounting bracket does so could use quick sand and spray if you want it to look clean in trunk
8.Lastly, I Have a set of Ross Pistons 8.5:1 (1,000 miles, some knicks on head could be reusable not sure therefore the low price) on 1g rods, if interested let me know and I'll text/email some pictures -$200
Thanks for viewing, if interested please send me a message through here or text me at 248-835-3529. Thank you, have a nice day
Located in Byron Center, Michigan
Last edited:
