1G Corbeau Brackets w/ stock belts

[Barra]

Has anyone had any luck getting the 1g seat belts to bolt up to the Corbeau bracket? I have the lap belt on just fine but the retainer for the shoulder harness isn't even close to working. Right now my options are looking like letting that retainer just dangle from the belt and bang around or to get out the cut off wheel and cut the thing off, neither of which are appealing to me.

I'm guessing Canadian seat belt parts are all but impossible to find at this point.

 

[Black95TSIawd]

You should look into using a belt designed for the seat ie harness.

 

[Barra]

Thought about it but I don't want to put in a cage and from what I've read a 4 point isn't the safest thing if the roof caves in.

 

[Black95TSIawd]

You don't need a cage to install a harness and you should never use a 4 point unless its like for autocross or something. 5 point or more.

 

[4Lurker4]

What do you need from a Canadian seat belt assembly? Couple part outs in my nick of the woods.

 

[ThunderChild]

you could also do a 2g belt conversion. its pretty straight forward and is almost the same as a Canadian 1g swap.

only one bracket and spacer to add, one hole to drill in the plastics.