GVR-4 Coilover Rebuild?

[lglracer]

Hey everyone!
My Galant VR-4 came with these coilovers. As far as I know the fronts are a custom setup and the rears are bilstein's. Any idea who would rebuild them or check them out? If I can get them rebuilt I want to put them on my Galant GS-X.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[pagosa dsm]

Get the part # and buy new 1s. I would guess 100.00 each

 

[GST with PSI]

Yeah, definitely a custom built set.

As was mentioned above, you'll need to pull the dampers out and see if you can locate a part number. If so, order new dampers and clean up all the other stuff, then reassemble and go.

What was the ride hight like with these installed?

 

[lglracer]

Yeah, definitely a custom built set.

As was mentioned above, you'll need to pull the dampers out and see if you can locate a part number. If so, order new dampers and clean up all the other stuff, then reassemble and go.

What was the ride hight like with these installed?

I will try to pull apart. The ride height was about stick height with 18s on. I could go lower but didnt want to.

Get the part # and buy new 1s. I would guess 100.00 each

I was looking at bilsteins for the rear and they dont make them any more. =/ going to see if they are a different part number. Looks like some guys use a 328i if I can find those.

 

[pagosa dsm]

https://www.dsmtuners.com/threads/bilstein-hd.420528/#post-152797861
this is what I did
Rick