The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

CF Canard Splitters

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Foreverfalcon40

15+ Year Contributor
236
0
Jul 19, 2006
North Babylon, New York
I got them in a trade, four of them.
I've tried searching on here with no avail.

How do I install these things? There are four of them. I assume to for the front and two for the rear bumper. WHich ones go in the front? I think these tings on the back bumper will look bad, so I just want to do the front. My bumper already has been pre-drilled for a front lip by previous owner. SO in case the holes effect the splitter...just bondo and re-tap?
 
I personally have never seen canards on the rear bumper of an eclipse, nor do I think it will really look that good. Anyways, usually you put two on each side, and Ive seen them riveted in, a notch put into the bumper pushed in then bondo'd, and fiberglassed in.
 
those are mine..its the cheap ebay kind. but i like it.

You must be logged in to view this image or video.

You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
these are purely cosmetic its the ebay kind its basically plastic with real CF overlay. i also thought about it and i used to live in ny which is why FOREVERFALCON im a member of nyccdsm. in ny i was worried about someoen stealign them or like you said kicking them off. but now im in florida and want to get the real ones.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Build Thread Updates

Latest Classifieds

Back
Top