1G Broken oil squirter, replace with a Evo 8/9 squirter?

[MotoEclipse]

Can I replace my 1g oil squirters with a Evo 8/9 squirter? they look the same. I can't find any 1g squirters, my whole build came to a halt because one just broke.

Thanks, Ethan

 

[RedTsi_PR]

They'll fit the are the same except a little shorter

 

[agentorange313]

They'll fit the are the same except a little shorter

yes they are fine to use

"These squirters are slightly shorter and angled slightly differently than the DSM-style squirters. As a result, there's extra piston clearance for certain applications. For example, many aftermarket pistons (especially forged) have piston skirt designs that would interfere with the stock DSM-style squirters. " RTM Racing

You must be logged in to view this image or video.

EVO on the left 6 bolt on the right

http://www.dsmtuners.com/forums/newbie-forum/372941-2g-pistons-1g-rods-combo-please-help.html

 

[Tfitch90]

Where can i purchase the evo squirters I just simply lost mine.

 

[talonDSMerr]

Anywhere that can get you OEM mitsubishi parts (jnztuning, extremepsi, etc.) The part number is MN143460.

 

[MotoEclipse]

i ended up getting mine re-brazed. worked great. Thanks for the answers.

 

[donaldseclipse]

How about the check valve, aka the banjo bolt. Is it necessary to use the Evo 8 check valve (banjo bolt) in my 6 bolt with the Evo 8 squirters?

 

[osiris]

how about the check valve, aka the banjo bolt, is it necessary to use the evo 8 check valve(banjo bolt) in my 6 bolt with the evo 8 squirters

Any update?

I am going to be running 2g/1g piston rod combo and am thinking of going with Evo squirters. Do I use the evo banjo bolts or 6-bolt?

 

[agentorange313]

Any update?

I am going to be running 2g/1g piston rod combo and am thinking of going with Evo squirters. Do I use the evo banjo bolts or 6-bolt?

http://www.dsmtuners.com/forums/cyl...vo-8-oil-squirters-install.html#post152817610