Brakes grabbing after I installed new parts

[Boostified]

Ok So I pulled my tranny and everything to put in a new flywheel, new axles, new TOB, new wheel bearing new lower balljoint, I put everything back together and now when I take off, it sounds like a stuck caliper, If I pull my steering wheel to the right it stops, I turn it to the left it gets worse. ( This test was at 30mph) After driving it about a mile my calipers were hot ( especially the passenger side) and my rims were even warm.

 

[djdsm]

re bleed the brakes and do it all over see if that works you could have a warpped rotor also let us know if that works

 

[Boostified]

Found out I didnt seat the ball joint all the way! so the ball joint was hittting the inside of the rotor! EEEK!

 

[djdsm]

thats not good but atleast you got it figured out and back running