blowing fusible link for engine

[ILLegit420aT]

So on my way to Jersey my car started just dying out, like it was losing fuel or spark. I popped my hood and quickly discovered that the fusible link in my fuse box (the one for engine/motour) was blown...so i took the power windows link...same amps...and it popped that one. I guess what im looking for is some schematics or wiring diagrams for the under the hood fues box...specifically the fusible link for engine. I have an aftermarket fuel pump, 4g63 injectors and fuelrail, an SAFC and a few gauges...just looking for a push in the right direction

 

[ILLegit420aT]

So i guess no one who looked at this thread knew anything, so i just started testing the fuel and ignition systems. I found that my coil is good, the wiring and connector are both good, my fuel pump works, and i am positive all the injectors are pulsing. That leaves the cam position and crank position sensors. So I will test those ttoday and hopefully find my issue...other than those two things i cant figure out what it might be. The car will start now but it sounds like its hitting on like 2 or 3 cylinders. So we will see what the issue is and ill let you know.

 

[ILLegit420aT]

revised....ecu went bad for some odd reason due to my safc so now im moving on to a mega squirt thanks for all the help

 

[bigbrowndog]

Did this solve your problem? We are having the same problem on our Eclipse.

Thanks

 

[ILLegit420aT]

stand alone fuel management system solved my issues, but if your popping that fusibled link, you have some bad wiring somewhere, or your ecu is fried