blitz dual solenoid BC install help

[ZigsGSX97]

i have a blitz dual solenoid boost controller and got a few simple questions. The large solenoid that this thing came with has an IN and OUT hose route and i kinda get where they go to but i want to make sure. Check my work: the IN hose T's inbetween where the plastic wastegate and the turbo wastegate is. The OUT T's inbetween where the blow off valve and intake is. Sound right? Also there's a nipple coming off of the j-pipe for my fmic and a nipple on the turbo wastegate that go to the stock plastic wastegate. I don't cap either of those off do i?

 

[ChrisNelson]

Good piece of equipment you've got there! I have one too.

Anyway, the "IN" side of the little black plastic box (The solenoid) connects to the vacuum port on the compressor housing of your turbo.

The "OUT" side of the solenoid goes to the vacuum port on the turbine housing of your turbo.

Do not intersect the vacuum line for the BOV at all for this application.

 

[ZigsGSX97]

so i don't need to use the nipple on my j-pipe? Just run the hose from the blitz solenoid to the wastegate actuator?

 

[ChrisNelson]

the nipple on the j-pipe I believe is for a boost gauge, or something like that. It has nothing to do with boost control.