ohlegend
10+ Year Contributor
- 581
- 43
- Apr 2, 2012
-
Pemberville,
Ohio
I have in my possession a 98 4G63 block and head. I will be starting the rebuild soon. This block was purchased to sell. Timing slipped and bent valves - very minor damage to valves and pistons are 9.5/10 (you can see where the valves kissed). Valve cover is 10/10 no cracks.
Scat forged H beam rods with ARP hardware
newer (very clean) ITM pistons
New ACL Bearings
Stock head w/ Black top cas
ARP Headstuds
New ACL oil pump
New Gaskets
This long block will come with intake and exhaust manifold, motor mount, new tensioner, new timing belt, fuel rail, water pump (with piping to filler neck), throttle body, oil filter housing, and sensors.
Block will be wire brushed and painted in a black high temp enamel paint.
All parts will be cleaned to the best of my ability. Possibly hot tanked.
If you are interested, and want specific parts installed, let me know
I am asking 1300 for the final rebuild
Scat forged H beam rods with ARP hardware
newer (very clean) ITM pistons
New ACL Bearings
Stock head w/ Black top cas
ARP Headstuds
New ACL oil pump
New Gaskets
This long block will come with intake and exhaust manifold, motor mount, new tensioner, new timing belt, fuel rail, water pump (with piping to filler neck), throttle body, oil filter housing, and sensors.
Block will be wire brushed and painted in a black high temp enamel paint.
All parts will be cleaned to the best of my ability. Possibly hot tanked.
If you are interested, and want specific parts installed, let me know
I am asking 1300 for the final rebuild
Last edited:
