The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Rix Racing

600hp holset build partout

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

blakkat

10+ Year Contributor
216
1
Sep 29, 2012
desplaines, Illinois
hi, i have several parts available from a 600hp holset build partout.

5speed vms shift knob with extender- $50
tial 38mm wastegate dump tube, heat wrapped-$60
fmic kit (33x8x3.5 core)- $450 (will need jpipe and lower straight tube)
stainless braided clutch line- $10
prosport oil pressure gauge- $30
zaklee clear cam cover- $50
safc2- $200
eprom ecu- $100
cams- 2 regrind sets (not sure what duration) $200 each
tial bov- $150
4inch intake with 2g maf- $180
evo 8 rear new h&r lowering springs- $125
strut tower bar $50
3 gauge a piller pod- $50
buschur crank pulley- $180
walbro 255- $65
freshly painted valve cover with metalic flake- $150
prothane motor mounts bnib- $50
New ignitor chip with pigtail- make an offer
stock power steering pump-$50

contact me at 312-342-7275 and we can make an appointment to meet up.
all prices are obo.
 
Bump

just got some more parts in

hks 280 cams in great condition asking $450 obo
fhr intake manifold with wooden spacer asking $550 obo
tubular exhaust manifold. hi temp coated runners with tial 38mm ewg pipe asking $300
tial 38mm wg silver top asking $175
1g dsm shep trans( local pickup only )- $600
1g transfer case rebuilt(local pickup only) -$200
 
Here are some pictures

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.
 
Not sure of mileage but it was done less than a year ago. We purchased this car from the original builder and it was done a year ago. Not sure on stage but the owner said 1-4 were rebuilt. I'm open to offers and it's an awd trans.
 
Yes it's still a 5 speed. And no I personally haven't but my friend did right before the car spun a rod bearing.
 
We have a reciept book that's an inch thick so ill have to sort through it.
 
I talked to my partner and he said that there is no reciept. He had a few local buyers if they fall through we may pull the case apart to show it has a 4 gear spider and check all of the other parts.
 
Not sure about flange but it had a larger throttle body on it. I was asking $400 for the manifold without the throttle body and $500 with it.
 
Found out the fmic is a pr kit price 280shipped with tial welded flange.

Also found out one of the regrind a is a dks3 so price is gonna be 150 shipped
 
ok so updated parts list with updated prices

tubular manifold with tial 38mm ewg provision- $200
1g maf plus filter -$30
cold pipe with 1g bov- $50
frh manifold with wooden spacer- $300
dks3 cams- $100
metal harmonic balancer/crank pulley- $75
eprom ecu- $75
lightweight flywheel with replaceable friction disk- $120
holset hx40 with bep housing has shaft play- $175
alternator- $60
tial 38mm ewg- $120
1g large tb elbow- $30
starter - $50
pr intercooler with tial bov flange- $250
fuel rail with -6 inlet and outlet -$65
new ignitor with pigtail- $65

please contact me as i have more parts if you need anything 312-342-7275
 
Whats the status on trans? Still avilable?

Also interested in the hx40
 
Trans is still up for sale, havet had
Time to check the insides but a friend of previous owner said he knows forshure it's a shep stage2 .

I checked the part number on the turbo and turns out it's an hx35 with the anti surge compressor housing and a t3 bep turbine housing.
 
Ill do $400 for the trans can pick up asap....
 
Just curious....a "600hp" partout that includes a HX40 which turned out to be a HX35, an AFC2, and a draw-thru 2G MAS? Something doesn't seem to line up between the title and the parts.


Also- you sold the turbo too cheap...the BEP housing is worth $150 alone as long as it wasn't a complete pile of rust. I would've paid more.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top