4GCS DOHC HEAD TO 4G64 BLOCK

[olschooltuner]

So I am getting ready to mate a 4gcs 2.4 dohc (2000 hyundai) to my 97 evlipse block (4g64) I have searched this but have found nothing detailed on this swap both are stock internals my block is 180 psi across the board.
What modifications will I need to do (drilling out head stud holes, block off oil holes)
What all do I need from donor car (hyundai)
What is cr
And lastly what timing marks do i use?
Thanks in advance.
Also If any importance I will be building a 4gcs/4g64 setup after this swap just doing this to get back up and running.
I also plan on running 11-14 psi boost on this current setup unless thats not recommended

 

[fi3ndx]

http://www.4g64.com/users/raycer97/2g_parts.htm never got finished but it's a good start. There are write ups out there I just don't have the links on hand atm. Do some digging they'll show up