3D Parts Discussion/Requests

[dsmcrzy]

This is awesome! I have one going in my 3D printer right now. What software did you use to model this? Did you have the OEM piece 3D scanned?

 

[thuddor]

This is awesome! I have one going in my 3D printer right now. What software did you

2G Window Door Trim

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Just reverse engineering. Used CATIA to create the model. I used the OEM trim that I have to measure it and recreate my version. I really wish people will upload their models there! It should help everyone

 

[alexr254]

Just reverse engineering. Used CATIA to create the model. I used the OEM trim that I have to measure it and recreate my version. I really wish people will upload their models there! It should help everyone

Wish i could help here as well. I have never used any 3D CAD software like CATIA and don't have access to it. I bet a lot of us are in the same boat.
Although i have 3D printed lots and have a good grasp of how to slice and print high quality with various filaments, when it comes to designing i'm lost.

I have tried to 3D scan some parts with no success. With all the curves, contours, odd angles, etc - I just cant seem to get it to scan right.
I've tried scanning the radio bezel, and the spyder driver side door instrument panel bezel.
And this is using a kinectv2 on PC, with a couple different scanning softwares which all gave bad results.
Im sure me not having a studio setup with perfect lighting and backgrounds isn't helping. But i try to work with what i have.

 

[thuddor]

Wish i could help here as well. I have never used any 3D CAD software like CATIA and don't have access to it. I bet a lot of us are in the same boat.
Although i have 3D printed lots and have a good grasp of how to slice and print high quality with various filaments, when it comes to designing i'm lost.

I have tried to 3D scan some parts with no success. With all the curves, contours, odd angles, etc - I just cant seem to get it to scan right.
I've tried scanning the radio bezel, and the spyder driver side door instrument panel bezel.
And this is using a kinectv2 on PC, with a couple different scanning softwares which all gave bad results.
Im sure me not having a studio setup with perfect lighting and backgrounds isn't helping. But i try to work with what i have.

If you can export the scanned parts to ".stp" , I can work with them and model it in Catia. No 3D scanning is 100% accurate. It's doable. If you wanna give me a try, just say

 

[alexr254]

If you can export the scanned parts to ".stp" , I can work with them and model it in Catia. No 3D scanning is 100% accurate. It's doable. If you wanna give me a try, just say

Sounds like a plan.
I went as far as painting the part white so the scanner can see it better.
I’ll give it another try soon and will do as you suggest.

 

[thuddor]

Sounds like a plan.
I went as far as painting the part white so the scanner can see it better.
I’ll give it another try soon and will do as you suggest.

That s great! Let me know when.

 

[97GSTProjectv2]

I recently purchased a FlashForge 5M PRO. Looks to scan defrost vents for the top of the doors and hopefully the recline knobs on the Evo Recaros. Got a couple other parts I’m sure will fall apart when I touch them but we’ll see!! Hoping to be very active in this thread!!

 

[thuddor]

I recently purchased a FlashForge 5M PRO. Looks to scan defrost vents for the top of the doors and hopefully the recline knobs on the Evo Recaros. Got a couple other parts I’m sure will fall apart when I touch them but we’ll see!! Hoping to be very active in this thread!!

If you can scan them, I can accurately 3D model it. Looking forward to work with you.

 

[that_red-2g]

Does anyone have a 3d file for the door defroster vent?

You must be logged in to view this image or video.

 

[Dirtbike29]

Does anyone have a 3d file for the door defroster vent?

You must be logged in to view this image or video.

Any luck yet I have mine in okay shape I will try after I finish a few prints

 

[97GSTProjectv2]

Does anyone have a 3d file for the door defroster vent?

You must be logged in to view this image or video.

working on it...but scanning the underside is being a real pain in the ass. I'll have something eventually...just a matter of finding the time to work on it.

 

[that_red-2g]

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Hope this will help someone in need

Thank you very much! I needed 1 for my car.

 

[Dylan94]

Thank you very much! I needed 1 for my car.

Is this a fog light bezel delete?

 

[TalonsThree]

Does anyone have a print file for the 1G Talon wheel center caps?

 

[Justboots]

Hello looking to get cad file for 1ga marker lens and turn signals for the front, if there are none already I’ll be getting them soon

 

[gmarq05]

Can anyone make a 3D model of the plastic pieces for the interior door panels? My window controls won't screw in anymore and I would like to replace them.

 

[jc_amann]

working on it...but scanning the underside is being a real pain in the ass. I'll have something eventually...just a matter of finding the time to work on it.

I need one for both doors... Any progress?

 

[SAUBIK]

Guys, do somebody have 3d scanned or model of 5th gears from evo 3 ? Jackstransmission page dont have available any, so i need to figure out, how to make it and i need exact 3d model for cnc or something

 

[Superman2484]

Not a part but something cool that this person did

You must be logged in to view this image or video.

Be a nice wall decor for the garage.

THIS THREAD IS MEANT TO BE FOR PART FILES TO BE ADDED, NOT TUTORIALS OR A GUIDE !

Discussion/Request Thread https://www.dsmtuners.com/threads/3d-parts-discussion-requests.548798/

In order to help the community, I thought it would be a great idea to have a main thread with all 3D print parts.
You need to specify the model, make of the car and some photos of the part (It would be great if you will post a photo with how the 3d printed part fits on the car).

It would be good if everyone who works in the field and models and prints 3D parts, post them here, so that we can give everyone the opportunity to complete their cars!

I'm currently trying to make a file for 2g ash tray/cup holder replacement. Once I get it dialed in I'll post it. Anyone else have one currently?

 

[thuddor]

I'm currently trying to make a file for 2g ash tray/cup holder replacement. Once I get it dialed in I'll post it. Anyone else have one currently?

I am also trying to 3D model the ashtray. I have the cupholder on my car and I can model it. If you try the ash tray, I can go further with the cupholder and upload it here. Deal ?

 

[Superman2484]

I am also trying to 3D model the ashtray. I have the cupholder on my car and I can model it. If you try the ash tray, I can go further with the cupholder and upload it here. Deal ?

Once I get my car back from the shop this week I'll have a few printed for test fit and I'll let you know!! Thanks!

 

[thuddor]

Once I get my car back from the shop this week I'll have a few printed for test fit and I'll let you know!! Thanks!

Great! Let's do this !!

 

[Mystikalbob]

Hello, does anybody have the 3d print file for the center console latch/lever? 2g eclipse/talon.

I tried the Outlander version but it was slightly off; close though.

 

[Anfurnyy]

For us 1g guys, I feel like some 3d printed clip retainers that could be epoxied to the back of the A pillar trim to keep these damn things from falling off would be pretty sweet.

 

[peon_slayer]

Would love a file for a 6 bolt block that has the crank pulley installed. Need to see the backside of the block.