The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Resolved 2G Thermostat housing sensors

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tsi6bolt

10+ Year Contributor
56
0
Dec 10, 2010
westminster, Colorado
I know there are a few posts on this topic and I apologize, but my question wasent exatly answered. Both of these sensors on my thermostat housing got the wires pulled out, I fixed one but need to buy the other one. I found out the one I fixed is the one that sends the temp to my dash. What does the other sensor do that has the wires pulled out (as seen in picture) I just got the car started and had it running and there was no check engine light with the one sensor not plugged in but after a small cruise around the block check engine light came on, can this sensor pull a code? What do both of these sensors do exactly and where can I but a new sensor? Thanks!
 

Attachments

You must be registered for see attachments list
The larger sensor on the left in your picture is the Coolant Temperature Sensor (Part #MD177572). This sensor provides signals to the ECU which is one of the major signals the ECU uses to adjust the radiator fans and is also one of the sensors the ECU uses to adjust fuel mixtures. This one is the most important of the two and is likely the cause of the CEL you observed.

You must be logged in to view this image or video.


The smaller one with the red connector in your picture is the Water Temperature Gauge sensor (part # MD091056) Its function is solely for the temp gauge on the cluster.

You must be logged in to view this image or video.



In the future, you may find this thread helpful: http://www.dsmtuners.com/threads/2g-engine-bay-electrical-connections.298047/

Both sensors can be had from supporting vendors on this site.

https://www.extremepsi.com/store/product.php?productid=23395&cat=1060&page=2

https://www.extremepsi.com/store/product.php?productid=23816&cat=1060&page=2
 

Attachments

You must be registered for see attachments list
Perfect that's what I thought great explination. If I get a new one from the vendors will it come with wires that I can just splice to the two wires?
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

  • For sale Misc Left Over Parts
    Hello, I have a few left over parts for sale, these do not include shipping, please pm me for a...
    • r3dmak
    • Updated:
    • Expires
  • For sale Alpha Injection Clinic 2200cc for 4G63 DSM/EVO
    I have a set of Alpha Injection Clinic 2200cc high z injectors for DSM/EVO. I am stepping up to...
    • spoolinpos
    • Updated:
    • Expires
  • Wanted WTB 2g half rad
    ISO of a 2g koyo half rad or something equivalent.
    • Michael Wucher
    • Updated:
    • Expires
  • For sale Coilover Springs
    Used pair of Eibach coilover springs from an old set of Ground Control coilovers. 2.5" inner...
    • RamenPride
    • Updated:
    • Expires
  • For sale 4G63 Mitsubishi logo early valve cover
    Early Mitsubishi logo valvecover. “1990” All threaded holes are good. Has the 90 style vent...
    • Galant665
    • Updated:
Back
Top