2G Radiator to 60-1 spacing

[r1ashad]

What is the spacing or maximum fan thickness that can be put on a 2G between the radiator and a 60-1 turbo compressor housing bolted to a equal length manifold?

 

[Eclipsei95cl]

I'm not 100% sure if its like this on everyones car. But for me I have a 60-1 with a dnp manifold and external gate. The fan for the AC/Drivers side has to go. So I only run one fan(Passenger side) and its this one from SBR http://www.slowboyracing.com/more.php?id=1541&

Oh and I don't have overheating issues. The needle on my temp gauge stays right in the middle even after I have driven for 3 straight hours or whatever.

 

[r1ashad]

I'm not 100% sure if its like this on everyones car. But for me I have a 60-1 with a dnp manifold and external gate. The fan for the AC/Drivers side has to go. So I only run one fan(Passenger side) and its this one from SBR http://www.slowboyracing.com/more.php?id=1541&

Oh and I don't have overheating issues. The needle on my temp gauge stays right in the middle even after I have driven for 3 straight hours or whatever.

Is your 12" Slim Line Fan mounted to your radiator with or without a shroud?

 

[Eclipsei95cl]

Everything you see on the pic at SBR is what is mounted on my radiator.

 

[Stapl3]

I had a 60-1 with a bullseye turbine housing that pushed the whole assembly out even more than normal (no denting of water pipe). I used both my stock fans.