Cobra723
Probationary Member
- 27
- 7
- Jan 7, 2003
-
West Palm Beach,
Florida
I'm parting out both my cars. So here's the part list. Almost everything is on the car, so I don't have pictures of everything just yet. However, if you're interested in anything, then please let me know and I would be happy to take pictures for you. Just because it's not listed doesn't mean its not for sale. Don't see something? PM me, chances are that I have it.
All prices are PLUS SHIPPING AND PAYPAL FEES(Unless sent via friends and family).
Long Block $2,500
- 6 bolt block, with Manley H beam rods, CP 9.5:1 pistons. with ARP hardware. OEM Mitsubishi oil pump, and stub shaft for balance shaft elimination.
- 2g head with FP2 Cams, Supertech springs & retainers, Supertech vavles, and light port work.
I'm willing to separate the head and block if I have a buyer for both.
- Less than 3k miles on the motor
DNP Manifold with MAP EF1 Turbo with billet compressor wheel, includes everything is the picture. $900
Full Face tubular manifold with ceramic heat coating $800
-Oil dipstick popped out due to a bad PCV valve and squirted oil on the manifold. Should clean up easy. (see pic above)
Holset HX40 with 66mm billet wheel rebuilt by Justin Whitesell (JusTurbos) $700
- Less than 300 miles on the turbo
AMS EVO street core intercooler with custom 2.5 piping and Tial 50mm BOV $700
FIC 2150cc Injectors $650
- Less than 150 miles on injectors
AEM wideband $125
Brand new in the box PowerStop C/S rotors, ceramic pads, and new calipers. All four corners. $350
OEM Headlights $50
All prices are PLUS SHIPPING AND PAYPAL FEES(Unless sent via friends and family).
Long Block $2,500
- 6 bolt block, with Manley H beam rods, CP 9.5:1 pistons. with ARP hardware. OEM Mitsubishi oil pump, and stub shaft for balance shaft elimination.
- 2g head with FP2 Cams, Supertech springs & retainers, Supertech vavles, and light port work.
I'm willing to separate the head and block if I have a buyer for both.
- Less than 3k miles on the motor
You must be logged in to view this image or video.
DNP Manifold with MAP EF1 Turbo with billet compressor wheel, includes everything is the picture. $900
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Full Face tubular manifold with ceramic heat coating $800
-Oil dipstick popped out due to a bad PCV valve and squirted oil on the manifold. Should clean up easy. (see pic above)
Holset HX40 with 66mm billet wheel rebuilt by Justin Whitesell (JusTurbos) $700
- Less than 300 miles on the turbo
You must be logged in to view this image or video.
AMS EVO street core intercooler with custom 2.5 piping and Tial 50mm BOV $700
You must be logged in to view this image or video.
You must be logged in to view this image or video.
FIC 2150cc Injectors $650
- Less than 150 miles on injectors
You must be logged in to view this image or video.
AEM wideband $125
You must be logged in to view this image or video.
Brand new in the box PowerStop C/S rotors, ceramic pads, and new calipers. All four corners. $350
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
OEM Headlights $50
You must be logged in to view this image or video.
Last edited: