Clutch GSX
15+ Year Contributor
- 347
- 1
- Nov 28, 2006
-
Denver,
Colorado
Stock 6 bolt head – clean = $500
Ported 6 bolt head – $1500 (Fresh build, never been installed)
Full Street Port with chamber work and milled deck
5 Angle Valve Job
New Ferrea valve guides
New Ferrea valves
New Manley springs and retainers
*New* Evo 8 Conical Valve Spring Kit with Custom Titanium Retainers = $225
*New* Ferrea Bronze Valve Guides (Intake (VG1051) and Exhaust (VG1049), 1mm Oversized) = $80
Intake and exhaust valve guide seals = $5
3" 90 Degree Bend Polished Aluminum Tubing (For Intercooler Piping) = $20
Broadway wide rear view mirror = $15
Aeromotive AFPR = $110
ACT Pressure plate and street clutch = $250
Hallman Boost Controller black = $25
JVC KD-R200 Head Unit (no pigtail) = $15
Bent AEM Intake filter w/ Intake pipe = $10
Custom Tubular Exhaust manifold (no brand) = $225
Front strut bar = $50
3” custom exhaust w/ RSR muffler no Cat = $150
OEM
(2) 2G Fuel Rail with = $20 each
1G Intake manifold = $50
1G Stock head components (Valves, Springs/retainers, keepers, seats, studs,
oil plugs etc) = $BO (Let me know what you’re looking for)
2G ECU Part #MD346676 = $50
1G or 2G? (see picture) Upper thermostat housing = $25
1G or 2G? (see picture) Exhaust manifold = $25
Stock 6 bolt Crank good condition = $80
EVO 3 GT Turbo slight shaft play = $300
Please email me with questions at [email protected]
No PMs please
Ported 6 bolt head – $1500 (Fresh build, never been installed)
Full Street Port with chamber work and milled deck
5 Angle Valve Job
New Ferrea valve guides
New Ferrea valves
New Manley springs and retainers
*New* Evo 8 Conical Valve Spring Kit with Custom Titanium Retainers = $225
*New* Ferrea Bronze Valve Guides (Intake (VG1051) and Exhaust (VG1049), 1mm Oversized) = $80
Intake and exhaust valve guide seals = $5
3" 90 Degree Bend Polished Aluminum Tubing (For Intercooler Piping) = $20
Broadway wide rear view mirror = $15
Aeromotive AFPR = $110
ACT Pressure plate and street clutch = $250
Hallman Boost Controller black = $25
JVC KD-R200 Head Unit (no pigtail) = $15
Bent AEM Intake filter w/ Intake pipe = $10
Custom Tubular Exhaust manifold (no brand) = $225
Front strut bar = $50
3” custom exhaust w/ RSR muffler no Cat = $150
OEM
(2) 2G Fuel Rail with = $20 each
1G Intake manifold = $50
1G Stock head components (Valves, Springs/retainers, keepers, seats, studs,
oil plugs etc) = $BO (Let me know what you’re looking for)
2G ECU Part #MD346676 = $50
1G or 2G? (see picture) Upper thermostat housing = $25
1G or 2G? (see picture) Exhaust manifold = $25
Stock 6 bolt Crank good condition = $80
EVO 3 GT Turbo slight shaft play = $300
Please email me with questions at [email protected]
No PMs please
Last edited:
