16g mbc help

[99 gst spyder]

i have a 16g set up in my dsm. i welded a nipple on the j pipe for the connection between the BCS, wastegate and j pipe. (no boost controller). I want to put this one mbc shown here on the picture in. i would want to hook it up like the picture shown right? (planning to). but i have one question, what about the two vaccum hose coming out from the BCS? do i leave the be without and connections?
this picture is showed the 1g and will it work for my 2g....?
i have the same mbc as shown on picture
any help, thanks

Google Image Result for http://members.shaw.ca/dsm.1000q/Engineprimer/1G/mbc.jpg

 

[97 4G63]

Just run a hose from the BCS from top nipple to the lower nipple do not unplug it or you will get a CEL..
let me know if you need pics ill run outside and take one.

 

[ndsti]

You need to connect one end to the fitting that you welded and the other to the wastegate.

You will need to determine the direction of the BC, that is in that link.

 

[99 gst spyder]

Just run a hose from the BCS from top nipple to the lower nipple do not unplug it or you will get a CEL..
let me know if you need pics ill run outside and take one.

so your're saying just connect the two hose from the BCS right.? pictures are always great...

 

[97 4G63]

Here it is..

You must be logged in to view this image or video.

 

[99 gst spyder]

thanks alot. i will try that tonight and see what happens. thanks again.