I broke the plastic while removing the hoses and now im considering fiav delete because finding that part is almost impossible where I live, the question is does the bypass kit have a plug or something for that hole in throttle body or will I have to use jbweld
Hello all,
This car is too much fun! and now that I have had some fun, I really want to get this thing dialed in to perfection. I am following this guide here: Tune Speed Density W/O MAF.If I am reading this document correctly, after setting up ECMLink and all of my Speed Density (SD) sensors...
Hi guys,
first of all, I apologise for dumb questions and bad English, I’m a non-US based newbie. Aside from the Chilton manual, this forum has been my only source of info. I’ve tried my best searching, so please link me to threads if I’ve missed something. I have the Euro version of the 2G -98...
Hello everyone! I will skip the storys and get to the point (if you want 'em, let me know).
I posted this on DMStalk, now here to increase my feedback chance:I got a 93' Eclipse 2.0L 4G63 DOHC N/A 152.000 KM and after sitting for about 3 years it has the following issues:
1. rough idle: RPM...
So I just removed my throttle body and I noticed this tan sensor was plugged in and I assume it's the FIAV? I also noticed the two coolant hoses are not connected and I assume it has been bypassed?
Hey guys. So ive been having some real trouble with idle surge over the past month or 2. I followed terrys idle surge guide to a T and still had found nothing so I post this in hopes it may help someone... I had tried everything except a full fiav block off. IAC, TPS, wiring, etc... So finally i...
so here’s the deal,Whenever I start my eclipse it idles really bad and almost stalls until about 5-10 minutes later the idle jumps and idles regular. I can’t drive it until the idle spikes so it sucks.
I’ve researched it a bit and it seems that what I need to do is block my FIAV. I found a...