This is how you quickly check if your valve (cam) timing is good or not. (* Only the valve timing. The belt tension and the balance shafts timing is a different story) It would be useful if you know this method, for peace of mind, like when you want to confirm the valve timing after installing...

Hello,Quick question:I am putting my engine (7-Bolt 4G63T) back together after having it completely apart and doing an extensive refresh.I am upgrading my cams and intend to degree them using adjustable cam sprockets.Obviously while reassembling the engine I am replacing all timing...

Okay so I have my timing situated for my 4g63 head on my 4g64 block (G4CS)Everything is lined up how it is supposed to be with the larger timing belt and both gears advanced by half a tooth. Here is my question:Because of the half a tooth difference, my dowel pins on the camshaft gears are...

Hey guys, so I figured out timing is off on my car (this explains my low vacuum at idle) so I set the crank at TDC and the cam gears are about a tooth off (see pic below). Just wondering what would be the easiest possible way to correct this. I’ve been told that I need to pull belt and redo...