The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Post a Question

Stockton Meet Round 4

Please Support STM Tuned

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

98GSX209

15+ Year Contributor
66
1
Feb 10, 2005
STOCKTON, California
WHATS UP DSM'ers THE TIME HAS COME FOR ANOTHER MEET. ALL THE MEETS WE HAd SO FAR HAVE BEEN PRETTY GOOD WITH NO PROBLEMS. I WOULD LIKE TO SEE SOME NEW FACES AND RIDES OUT THERE FOR , SO ALL ARE WELCOME TO COME DOWN AND HANG OUT WITH US. IF WERE LUCKY WE WILL BE BLESSED WITH A SPECIAL APPEARENCE OF NONE OTHER THEN THE AND ONLY DEFIANT( :D ). WE MEET AT FOOD 4 LESS OFF OF I-5 AND DOWNING @ 9:45PM OR 10:00PM TIL ABOUT MIDNIGHT OR LATER. HOPEFULLY WE COULD GET ENOUGH DSM'ers TO SHOW UP WE COULD GO HIT THE STREETS. :cool: :thumb: :rocks: :dsm: :talon: :las


FRIDAY MAY 20TH
FOOD 4 LESS HOPE TO SEE YA THERE
 
Jeeze. What's with the caps?

98GSX209 said:
I WOULD LIKE TO SEE SOME NEW FACES AND RIDES OUT THERE FOR , SO ALL ARE WELCOME TO COME DOWN AND HANG OUT WITH US.
Click to expand...
I brought a new ride, and was roundly castigated. Like a rented Focus wasn't good enough for you elitists or something. :|
 
Well, I would go, but I no longer own a DSM (thank god! :D ). I could bring out the new ride....or i'll just roll with thomas... LOL!
 
aww defiant youre just jealous that i got dibs on the oracle.

man seriously next time she comes around, im hiding. im cool with people, but dam, she just doesnt stop talking.

btw from now on, just park at the place across from the bank that we usually move to, might as well get into the habit of just going there first.

btw ill be there and wont be reppin the 4x4 look. tein h-techs and tokico adjustables should be in by midweek at the latest.
 
what you talkin bout willis? what hole?

dammit my tax refund just came in now i might have sears do it while im at work or something, you guys got me all worried doing springs/struts are something an elitist like me cant do.
 
yeah but i work at the mall, so i could go into work, drop the car off, work, and get off, walk to sears, and pick it up.

but ill more than likely attempt it myself. if it doesnt work out, then ill have them do it. but dropping a car and installing shocks is a n00b deal, honda kiddies do it everyday with their 20$ ebay coilovers, if i cant do it with all the tools i have in my garage, i shouldnt be around cars.

btw still aint gonna tell us where the mighty whitey talon was at last weekend?
 
damn thats a 3 hour drive for me and i have no hood right now. hmm, ill se what i can do.. maybe i can go...
 
WELL ITS ALL BAD GUYS MY F@#K'N CAR IS BROKE DOWN AGAIN FOR THE FOURTH TIME. I BLEW OUT MY MOTOR, THE CRANK BEARINGS WENT OUT AND LOCKED UP MY MOTOR. SO I WON'T BE THERE THIS FRIDAY UNLESS I GET THE NEW MOTOR AND HAVE EVERYTHING DONE BY FRIDAY. IF YOU GUYS KNOW WHERE TO GET A COMPLETE MOTOR FOR A REASONABLE PRICE AND SOME WHERE CLOSE SO I COULD PICK IT UP LET ME KNOW. :mad: :notgood: :(
 
98GSX209 said:
WELL ITS ALL BAD GUYS MY F@#K'N CAR IS BROKE DOWN AGAIN FOR THE FOURTH TIME. I BLEW OUT MY MOTOR, THE CRANK BEARINGS WENT OUT AND LOCKED UP MY MOTOR. SO I WON'T BE THERE THIS FRIDAY UNLESS I GET THE NEW MOTOR AND HAVE EVERYTHING DONE BY FRIDAY. IF YOU GUYS KNOW WHERE TO GET A COMPLETE MOTOR FOR A REASONABLE PRICE AND SOME WHERE CLOSE SO I COULD PICK IT UP LET ME KNOW. :mad: :notgood: :([/QUOTE


hey i know where you can get one for fairly cheap with a warrenty....the place is called "Attarco". they sell used "JDM" motors. If you're lucky, you might get a 6bolt...here's their phone number....(209) 521-4000. they are in Modesto. If ya need help picking it up, I probably have access to a truck...
Click to expand...
 
krazywhitboy said:
98GSX209 said:
WELL ITS ALL BAD GUYS MY F@#K'N CAR IS BROKE DOWN AGAIN FOR THE FOURTH TIME. I BLEW OUT MY MOTOR, THE CRANK BEARINGS WENT OUT AND LOCKED UP MY MOTOR. SO I WON'T BE THERE THIS FRIDAY UNLESS I GET THE NEW MOTOR AND HAVE EVERYTHING DONE BY FRIDAY. IF YOU GUYS KNOW WHERE TO GET A COMPLETE MOTOR FOR A REASONABLE PRICE AND SOME WHERE CLOSE SO I COULD PICK IT UP LET ME KNOW. :mad: :notgood: :(
Click to expand...


hey i know where you can get one for fairly cheap with a warrenty....the place is called "Attarco". they sell used "JDM" motors. If you're lucky, you might get a 6bolt...here's their phone number....(209) 521-4000. they are in Modesto. If ya need help picking it up, I probably have access to a truck...
Click to expand...

They sold me a rodknocked engine. However, they did replace it... but that one sucked too. Low compression, and a couple months later it blew the head gasket.

It's better just to save up and buy a rebuilt one.






Annnyways...how about instead of two meets on the same weekend, we make one big one and meet up on Saturday in Dublin with everyone else?
 
i've bought 2 motors and 3 transmissions from them, never had any problems...of course, those were honda motors.. ROFL

i didn't know there was a meet in dublin....i'm down to roll out there too.... :rocks:
 
Well, I'm pretty sure
I might be able to make it on friday, but definately not on saturday...
 
krazywhitboy said:
i've bought 2 motors and 3 transmissions from them, never had any problems...of course, those were honda motors.. ROFL

i didn't know there was a meet in dublin....i'm down to roll out there too.... :rocks:
Click to expand...
i dont think they want your mustang over there LOL!
 
I Called That Place And He Told Me All They Have Is Chrysler Rebuilts And That I Would Have To Go To The Dealer. I Don't Know! But You Guys Can Help Out Or Find A Jdm Motor Please Let Me Know.
 
One of our sponsors sells rebuilt 6-bolt long blocks.
Comes complete from oil pan to valve cover, check it <a href = http://www.karking.com/catalog/product_info.php?cPath=22&products_id=183>Rebuilt 6-Bolt</a>
 
Strm Trpr said:
One of our sponsors sells rebuilt 6-bolt long blocks.
Comes complete from oil pan to valve cover, check it <a href = http://www.karking.com/catalog/product_info.php?cPath=22&products_id=183>Rebuilt 6-Bolt</a>[/QU

THERE MOTORS LOOK PRETTY GOOD , BUT ARE THEY ANY GOOD IS THE QUESTION. FOR $1750 IT BETTER NOT HAVE ANY PROBLEMS , CAUSE I STILL GOT TO GET A TURBO FOR IT. I THINK I BLEW MINE SO I WILL EITHER SEND IT IN AND FIX IT WITH UPGRADES IF ANY OR GET ANOTHER ONE, NOTHING TO MUCH FOR NOW JUST SOMETHING SIMPLE.
Click to expand...
 
are we still gunna meet up?

I'm gunna invite my neighbor with his white 95-96 talon tsi.
I'll call up my boy Erik with the green tsi awd.

Are we still gunna meet at 9:45pm?

at Food 4 Less on downing and I-5?
 
DROOPY209 said:
are we still gunna meet up?

I'm gunna invite my neighbor with his white 95-96 talon tsi.
I'll call up my boy Erik with the green tsi awd.

Are we still gunna meet at 9:45pm?

at Food 4 Less on downing and I-5?
Click to expand...


yup the meet is still on, we might be a few people short, but its all good.... :rocks:
 
alright meet. there was almost more non dsm's than there were dsm's.

2 white 2g spyders
1 grey(they call it purple) 2g spyder(mine)
1 red 1g awd
1 99-04 V6 mustang vert
1 95 mustang 5.0
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Boosted Fabrication
ECM Tuning
ExtremePSI
FIBA Motorsport
Fuel Injector Clinic
Innovation Products
Jacks Transmissions
JNZ Tuning
Kiggly Racing
Morrison Fabrications
Rix Racing
RockAuto
STM Tuned
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top