Fuel System Upgrade

[gsxeclipsed]

I have been reading and reading since the cold weather hit and my tranny wouldnt go into 5th or reverse close to the end of the season about fuel systems. I am planning on going e85 in the spring with a bigger turbo. Ive read all the vfaq and install write ups i could find. I dont like to upgrade things i dont need to, but ive come accross a great deal on some -8an line and i figured why not do my fuel system for e85. So my main question is what is the size and pitch of the stock fuel outlet on the fuel hat? I have read all of these write ups and i never see anyone say the size or thread pitch. I will be running a bosch 044, -8 feed line, fuel labs filter and regulator, and 1200cc injectors With atleast an FP red.

Thanks, Ben

 

[VETTE_50_TH]

Im not sure what pitch but the relative size of it is a 4 -an. Its smaller than a 6.

James

 

[deflator]

The fitting on the pump assembly is a 14mm X 1.5 saginaw fitting. I know ANplumbing.com has a -6an male to 14.5X1.5 female fitting, don't know about -8an.

http://www.dsmtuners.com/forums/bolt-tech/192902-thread-size-2g-awd-fuel-pump-assembly.html#post151541307

 

[Boosted98gsx]

Just drill through the bulkhead on the fuel pump assembly, and use a -8 bulkhead through it. Get the -8 outlet for the 044, couple them, put a -8 90* outside the tank and voila!